Iwitness still useless!

[russ]

I really hate to be so negative but so far
Iwitness is yet another useless program I
have purchased to try and see my one x-10
camera. I can get iwitness to load and view
my camera after I install the software.
Unfortunately it only works once, if I want
to see the camera again I have to re
install the software each and every time.
When I launch iwitness it will control the
camera’s movement every time but no video.
I called X-10 and talked with someone who
had no idea so I posted here and now I am
posting again. I would appreciate any
suggestions.

[John E]

Hey Russ   What kind of computer do you
have    

[Glendoo]

Hello Russ,
Does the camera icon show "Go Live" or "On
Air" in AH Pro software? Have you tried to
toggle the camera power supply house and unit
code on and off and back on again?

[donald mcmow]

First of all: When AHP is loaded the second
time, is there an icon on the lower left
hand side that looks a red circle and line
throught it. Yes - this means that AHP is
not recognizing that you have the VA11A
drivers loaded. Check in Control
Panel/System/Hardware and make sure that
you have the appropriate drivers loaded. Do
you dis-connect the USB cables? It is
possible that the computer/OS is not
loading the drivers when you re-load AHP.
Do you completly shut down your computer or
just put it in suspend or hibernate modes?
Again the OS/computer might not be loading
the drivers properly. Close AHP, dis-
connect your VA11A and re-connect it, make
sure that the drivers are loaded before
running AHP. You might have to switch USB
ports being used for the VA11A. You
shouldn't have to re-install AHP everytime
that you have this problem. You might have
to re-start the computer to get things to
work properly. I hope this helps.