Please login or register.

Login with username, password and session length

Author Topic: How to set PRESETS on a DS7000 Alarm and capture video  (Read 8161 times)

SteveRF

  • Hero Member
  • *****
  • Helpful Post Rating: 13
  • Posts: 410
How to set PRESETS on a DS7000 Alarm and capture video
« on: October 30, 2005, 03:27:26 PM »

I am a bit confused and a new iWitness user.
My DS7000 is set to House Code A1.  I
understand that I can capture the alarm
condition by using a macro to trigger on "A1"
ON ?? If I want to capture stills and video
during an alarm condition, how do I set a cam
"preset" to force my Ninja cam (H1) to
position P4.  I set up a macro to trigger on
A1 ON but cannot see any "presets" other than
the default 1.  I hope this is clear but what
I want to do is command cam H1 to turn ON and
go to preset position P4 and capture a
snapshot and then video for 1 minute.  I see
the commands but cannot seem to determine how
to set up a preset (position ?) of P4.  Any
tips would really be appreciated !
Regards,
SteveRF
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.