Please login or register.

Login with username, password and session length

Author Topic: FLAG PROBLEM  (Read 9912 times)

JimC

  • Hero Member
  • *****
  • Helpful Post Rating: 41
  • Posts: 631
FLAG PROBLEM
« on: November 26, 2004, 09:34:59 PM »

I created a simple macro that did nothing
more than set a flag. The results were
somewhat surprising. I tried to set flag 1
but when I checked it in the status menu
flag 14 was set. I cleared this and tried
again but this time with flag 2. When I
check in the status menu flag 6 was set.
Trying to set fag 3 resulted in flag 4
being set. Trying to set flag 4 resulted in
flag 12 being set. I stopped after this, as
I am totally confused. The above results
are repeatable.
Logged
_ _ ...  ..._ _

donald mcmow

  • Hero Member
  • *****
  • Helpful Post Rating: 0
  • Posts: 306
Re: FLAG PROBLEM
« Reply #1 on: November 26, 2004, 09:40:38 PM »

This is being addressed in the next update
release on the 29th. AHP 3.170
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.