Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[wray]

When ever I try to use the "module status"
condition in a macro it seem pretty abitrary
which house code it will allow me to use. I
can't seem to find anyway to select the house
code I want. How do others select the house
code of the module they wish to check?

[donald mcmow]

Module status only works for the housecode
you have set to be monitored. If you have
housecode "A" set, then that is the only
housecode available to check. This is a
limitation of the firmware in the CM15A.
People have requested that this be changed -
but it would require more memory to keep
track of each housecode (16 times the
current amount used). I don't know exactly
how much memory is in the CM15A but it
would take about 32bytes just to keep track
of ON/OFF states - dims would be
considerably more. If you have the
conditional macros then you could keep
track using flags (13 flags - effectively)
plus the 16 from your house code.

[wray]

Thanks Donald   ...back to the drawing board.