Please login or register.

Login with username, password and session length

Author Topic: Activated timer routines  (Read 11238 times)

mtrcarrsev

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Activated timer routines
« on: October 17, 2005, 02:54:58 PM »

Is there a method to activate timer
routines at the press of an X10 button?
For an example, have B2 activate timers to
turn lamp B5 on & off during dusk to
10:30PM, and lamp B6 to turn on & off at
various intervals to make the house
look "lived in" while we're gone.  I would
like to then deactivate the timer routine
with B2 "off" when I return home.
I assume this would use the SmartMacros
function of the AHP (which I do have), but
I'm not sure how to go about it.  Thanks!
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 283
  • Posts: 10523
  • I don't work for X10, I use it successfuly!
Re: Activated timer routines
« Reply #1 on: October 17, 2005, 03:08:47 PM »

there is a way to do it using smartmacros
and timers first create the macro (not b2
ON/OFF as the trigger) you wish to fire
while your away with the condition b2 is ON
next create a  module B2, next create a
timmer for your macro it will only fire at
the times you want if B2 is on. When you
come home turn off B2 and the macro will
stop firing at the set times.
Logged
Please Read Topic:
General Forum Etiquette
Before you post!
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.