Please login or register.

Login with username, password and session length

Author Topic: Weird One  (Read 6727 times)

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Weird One
« on: March 14, 2005, 10:44:22 PM »

Installed ahp data file on M.E. with
diagnostic ver 3.180 at 4:00pm everything
working!Ok 9:30pm macro fired from motion
sensor won't fire macro humm pc clock is all
off (9:30 am) no timers or macros will fire
this one looks like a OS prob. reset the pc
clock sill nothing reset ahp no results
downloaded timers and macros no results,Humm
opened hardware configuration and updated
interface . BINGO everything works Realy
think this is an OS one.

Logged
Please Read Topic:
General Forum Etiquette
Before you post!

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: Weird One
« Reply #1 on: March 14, 2005, 10:49:45 PM »

Update : maybe not 10:07 on macro fired but
not the off one which is triggered 4min
later by motion sensor off rf.
M.E. realy sucks!
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

roger1818

  • Hero Member
  • *****
  • Helpful Post Rating: 28
  • Posts: 1072
  • Roger H.
Re: Weird One
« Reply #2 on: March 15, 2005, 11:33:41 AM »

I don't understand why anyone would use
ME.  Win98 is good for old systems and XP
and 2000 are good for newer systems.
Logged

andyd

  • Sr. Member
  • ****
  • Helpful Post Rating: 1
  • Posts: 82
Re: Weird One
« Reply #3 on: March 15, 2005, 12:04:07 PM »

I use ME because it was on my computer when
I bought it and I have had no reason to buy
another OS.

Andy D
Logged

h j flynn

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 42
Re: Weird One
« Reply #4 on: March 15, 2005, 01:27:18 PM »

For the cost of the OS upgrade its
sometimes better to by a low end PC with XP
sp2 on it, plus the benifit of hardware
that matches the OS. In my opion for what
its worth.

An I agree with tuicemen, ME s---ed I found
98 SE more stable. Besides my understanding
is Micosoft finally stopping support for
98, 98 SE and ME mid year hopefully. Old
OS's die hard as do the hardware they were
built for!
Logged

roger1818

  • Hero Member
  • *****
  • Helpful Post Rating: 28
  • Posts: 1072
  • Roger H.
Re: Weird One
« Reply #5 on: March 15, 2005, 01:57:36 PM »

AndyD:  If ME works well for you, then by
all means stick with it.  No point
upgrading needlessly.  Most people I talked
to found it unreliable though.

HJ Flynn:  This is the third time I have
heard Microsoft announce that they are
abandoning support for 98.  Both other
times they changed their mind due to public
pressure.  It wouldn’t surprise me if they
end up not supporting ME but continue to
support 98.  I think there are a lot more
machines running 98 than ME.  This is
partly because ME is unreliable (I think
more people upgraded to XP than ME) and
partly because many corporations went from
98 to 2000 instead of ME.
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: Weird One
« Reply #6 on: March 15, 2005, 02:58:54 PM »

M.e. is coming off this pc at the end of the
week and I'll put 98 on it to test.i'm
having all kinds of problems with macros
with ver 3.180 I'll start testing ver 3.181
now see if it still has these isues.
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

bryana_fl

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 21
Re: Weird One
« Reply #7 on: March 15, 2005, 03:37:44 PM »

Best Buy has a special this week on XP Home
Edition $39 after rebates.  XP is a much
better solution to your problem.
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: Weird One
« Reply #8 on: March 15, 2005, 03:56:58 PM »

I have XP PRO I'm only testing these other
OS as it seems that is where most of the
bugs are.
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

donald mcmow

  • Hero Member
  • *****
  • Helpful Post Rating: 0
  • Posts: 306
Re: Weird One
« Reply #9 on: March 16, 2005, 06:06:46 AM »

Tuicemen - In your update you said that the
OFF macro did not fire 4 minutes later -
was it supposed to fire throught a timer or
throught the motion sensor. If through the
sensor then 2 things: #1 the motion sensor
did not get triggered to begin with. #2 you
entered the wrong code for the trigger.
Or I am reading this the wrong way because
it sounds like you are using a timer to
trigger the macro and expecting the motion
sensor to turn it off. If the motion sensor
isn't triggered then it can't turn it off.
By the way motion sensors don't get
triggered on a scheduled time. They might
have a delay built into them to trigger an
OFF AFTER they have been triggered to begin
with. Did you see what activity monitor had
recorded - did it receive the ON/OFF
triggers?
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: Weird One
« Reply #10 on: March 16, 2005, 03:01:24 PM »

Donald McMow : I have a motion sensor turn
on lights in a macro then 3min later the
motion sensor sends a off rf signal which I
use to turn other lights on in another
macro  and an else to turn off lights in
another macro every thing was working fine
the diagostic unit sees the motion sensor rf
triger but doesn't respond sometimes it
doesn't see the rf but usually it does
according to the AM.
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: Weird One
« Reply #11 on: March 17, 2005, 09:36:25 PM »

UPDATE:
Just recieved an new TM751 (fried my old
one,long story) and set it to same house
code as my motion sensor.Bingo! Everything
is working again even faster (go figure). I
never configured the Tm751 into AHP as I was
just going to test the module and unplug it
but I think I'll leave it pluged in, at
least till the next update.
Must be an RF thingy & Smartmacros, this is
a wierd one.  X10Pro?
Logged
Please Read Topic:
General Forum Etiquette
Before you post!
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.