Please login or register.

Login with username, password and session length

Author Topic: Macro problem  (Read 2936 times)

donald mcmow

  • Hero Member
  • *****
  • Helpful Post Rating: 0
  • Posts: 306
Macro problem
« on: March 23, 2005, 10:07:20 AM »

I noticed that there seams to be a problem
when macros are triggered. While using
Smartmacro with an "ELSE" statement creates
2 macros ie: 2 macros on the same address
code - A1 On. A 3rd macro is created on A1
Off. I noticed that when macro #1 is
triggered the buttons on ALL 3 macros are
flashing. The command sequence is small -
check a flag, if Off then turn on a light,
If On then turn the flag off. Macro #3
turns the flag On. It seams to work for a
couple of times and then you can't run the
macro and have the commands execute
properly, after that it stops working.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.