Please login or register.

Login with username, password and session length

Author Topic: Bug Changing from LM465 to WS13A-L  (Read 3436 times)

roger1818

  • Hero Member
  • *****
  • Helpful Post Rating: 28
  • Posts: 1072
  • Roger H.
Bug Changing from LM465 to WS13A-L
« on: April 03, 2005, 11:43:06 PM »

I have a couple lamps that I switched from
using a LM465 to an AM468 (modified to
disable sense current) so that I could use
CFLs in the lamps.  In AH Pro I changed it
to a WS13A-L so that they will still
respond to a Room-All-Lights-On (it
obviously still won't respond to a House-
Code-All-Lights-On command).  I have a
macro that previously would turn both of
these lights ON to 100% individually.
After I made this change, the macro was
automatically modified to turn OFF the
lamps.  Obviously the macro should turn the
lamps on.
Logged

X10 Pro

  • Hero Member
  • *****
  • Helpful Post Rating: 23
  • Posts: 1416
Re: Bug Changing from LM465 to WS13A-L
« Reply #1 on: April 04, 2005, 01:05:59 PM »

Good catch. We'll have to fix that.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.