Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[chasonek]

I was wondering IF it was possible to have
two trancievers set to the same house code?
The reason is because I do not have but 4
X10 items and one remote.
The problem is that I live in a mobile home
and the motion detectors can not get past
the metal of the mobile, nor can the remote.
I was wondering IF I could have one out in
my shed that is close to the motion
detectors and the one in the house?
Would the send the ON/OFF command to the
Cameras and cancel out each other or what?

Plus the motion detector can not get any
signal to my VCR Commander II.

Chas

[jb]

The problem you are most likely exp. is that
the outlets your tras is plugged into is
probably on a different phase than the
outlets of your cam etc.  all devices being
used must be on the same phase or a phase
coupler must be installed.