Please login or register.

Login with username, password and session length

Author Topic: 6-n-1 remote codes  (Read 16297 times)

Abizar Vakharia

  • Guest
6-n-1 remote codes
« on: February 05, 2006, 05:06:34 PM »

I have a UR19A, 6-in-1 remote and am trying
to use it has my master remote.  I cannot
seem to find the right code for 2 devices.
Where can I find these codes?  I have
looked on the online PDF & Addedum -  no
luck.

The devices I am trying to add are:

1. Sony CD/DVD Player: DVP-NS315
2. Sony Receiver: STR-H740P

Any help would be greatly appreicated
Logged

allen55

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
Re: 6-n-1 remote codes
« Reply #1 on: November 18, 2006, 04:05:13 PM »

I have the 5 in 1 x10 learning remote which migjht be slightly different from your. If for some chance your remote have the same buttons as the x10 learning remote controi here were the instruction I put together to help others how to program your remote automatically if your device code is not listed. I hope this helps out. 

How to program the x10 learning remote control without using device  codes

Hold down the “Setup Button” until the red led light stays on.
Click one of the functions you want to use: IE: TV, VCR, CBL or, X-10 until light begins to blink.
Start clicking the CHAN +(UP) button until the channel changes. Once the channel changes you have found the code for that device, Click the ENT Button to save the code for that device.

To test it clicks the Power Off button for that device to turn off. If it turn off then you are done and Repeat these same steps to program your other devices such as your cable/box.

I hope this help you out.
allen55
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.