Please login or register.

Login with username, password and session length

Author Topic: Outdoor motion dector floodlight  (Read 19247 times)

K. Collins

  • Guest
Outdoor motion dector floodlight
« on: June 18, 2004, 10:47:58 AM »

Is there a manual online for the outdoor
motion detector floodlight? My electricity
went off in a storm and when it came back
on the floodligts stay on all the time. I
lost my manual that came with it.
Logged

Roc

  • Guest
Re: Outdoor motion dector floodlight
« Reply #1 on: June 19, 2004, 05:08:07 PM »

I found this from the manual it might help
you:

Problem: The floodlights are on constantly
and will not turn off.

Solution: If turned on by a command from an
X10 Controller, the Motion Monitor stays on
until turned off from and X10 Controller, if
necessary send an Off command to the Motion
Monitor from an X10 controller, returning
the Motion Monitor to normal cycling mode.

Also, if the Motion Monitor is accidentally
powered off (from a wall switch that
controls the power to it) while the
floodlights are on, it will stay on when the
power is reapplied. After dark, (depending
on the position of the dusk setting) trigger
the Motion Monitor by walking in front of
it, then after the delay time you've set the
floodlights will turn off and return to
normal operation.

I found it here:
ftp://ftp.x10.com/pub/manuals/pr511-om.pdf
Logged

K Collins

  • Guest
Re: Outdoor motion dector floodlight
« Reply #2 on: June 20, 2004, 12:43:10 AM »

Thanks Roc, it was just what I needed.
Logged

al

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 32
Re: Outdoor motion dector floodlight
« Reply #3 on: June 24, 2004, 09:50:24 PM »

How can we prevent the light from staying on
when out of town and a power failure occurs?
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.