Please login or register.

Login with username, password and session length

Author Topic: Doorsensor  (Read 21025 times)

Thad Lee

  • Guest
Doorsensor
« on: May 26, 2004, 06:41:27 PM »

I set up a Protector Plus system and one of
the door sensor reacts slowly.  The door has
to be open for a couple of seconds before it
recognizes that the door has been opened.
The door jam is steel I was wondering if you
have ever had problems with a magnetic field
holding for a while in these cases?
Logged

Ron J Jenkins

  • Guest
Re: Doorsensor
« Reply #1 on: June 05, 2004, 04:35:55 PM »

I have seen in other posts that if it is
steel use a popcyle stick (s) to move it
out from the steel.
Logged

Phil Han

  • Guest
Re: Doorsensor
« Reply #2 on: June 11, 2004, 03:26:41 AM »

Radio Shack or security vendors sell door
contact spacers, there just plastic spacers
to move the contact out further.  Or
popcicle sticks would work.  Also make sure
you are using alkaline batteries for strong
power, and make sure there are not other
magnetic devices nearby.
Logged

Phil Han

  • Guest
Re: Doorsensor
« Reply #3 on: June 11, 2004, 03:26:42 AM »

Radio Shack or security vendors sell door
contact spacers, there just plastic spacers
to move the contact out further.  Or
popcicle sticks would work.  Also make sure
you are using alkaline batteries for strong
power, and make sure there are not other
magnetic devices nearby.
Logged

Anton M

  • Guest
Re: Doorsensor
« Reply #4 on: June 17, 2004, 11:57:30 PM »

Or maybe he has the switch on the sensor set
to Max rather than Min?
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.