Please login or register.

Login with username, password and session length

Author Topic: Multiple Motion to One Camera  (Read 11739 times)

RoCKo

  • Guest
Multiple Motion to One Camera
« on: July 19, 2004, 04:57:56 PM »

I have 4 cameras in different locations.

One camera scans the whole back yard.
The back yard has two entry points.  I
would like the camera to come on
whenever  motion is detected at either
location.

Is it possible to set 2 motion detectors so
that if motion is detected at either
location... a single camera will come on?

Is this as easy as setting both to the
same house/number code?

Thanks

RoCKo
Logged

Razzo

  • Guest
Re: Multiple Motion to One Camera
« Reply #1 on: July 19, 2004, 06:08:15 PM »

My thought is that it should work if you set
2 motion sensors to the same house/unit code
as the camera. I am not sure what would
happen if motion was detected by both motion
sensors at the same time.

Let us know what happens.
Logged

RoCKo

  • Guest
Re: Multiple Motion to One Camera
« Reply #2 on: July 19, 2004, 07:26:54 PM »

Thanks

It does seem like it would work as the
sensors will send an "on" signal to the
camera when there is motion and an "off"
signal, after the preset time, when there
is no motion. ( I believe that's how they
work).  Multiple "on" signals shouldn't
affect anything... kinda like pressing the
on button on your remote multiple times.

I'll test it out and let you know.

RoCKo
Logged

RoCKo

  • Guest
Re: Multiple Motion to One Camera
« Reply #3 on: July 20, 2004, 07:35:36 PM »

Yep, works great.  Just set both sensors
to the same House/unit code as the
camera.  Kinda like extending the range
of on sensor.

RoCKo
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.