Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[scott]

I have installed a Floodcam on the wall
overlooking a private parking area, and I
am trying to get it to work with the VCR
Commander II.

The VCR Reciever is hooked up to a Citizen
TV/VCR 13 inch combo unit and it records
images from the Floodcam. I am trying to
get the VCR Commander II to work so that
the VCR only records when the motion
detector is triggered which is not
happening.

I have tried the other suggestions in the
other forumes on setting up the VCR
Commander II and none of them work. I am
getting really frustrated with the lack of
documentation and tech support for hooking
up the Floodcam and the VCR Commander II.

HELP PLEASE

Thanks
Scott

[Kenneth Herring]

Scott, if you're still having problems by
now, please look at my posts on the camera
forum. The mothod I describe seems to work
fine. Just be aware that it all comes down
to a matter of timing. Just be patient and
check-out the similar posts at the top of
the 'Cameras' forum. Good luck!

[Kenneth Herring]

Scott, if you're still having problems by
now, please look at my posts on the camera
forum. The mothod I describe seems to work
fine. Just be aware that it all comes down
to a matter of timing. Just be patient and
check-out the similar posts at the top of
the 'Cameras' forum. Good luck!