Please login or register.

Login with username, password and session length

Author Topic: X10 Powerhouse- supervised Security System  (Read 5301 times)

carlos

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
X10 Powerhouse- supervised Security System
« on: August 27, 2005, 10:40:20 AM »

All of the lights on my console are slow
flashing continuously. The system will not
arm or respond. Is there a way to reset it
without having to reprogram all of the
sensors?
Logged

john

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Re: X10 Powerhouse- supervised Security System
« Reply #1 on: August 28, 2005, 12:36:36 PM »

How do you disarm at the DS7000 console?
Logged

sherry

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: X10 Powerhouse- supervised Security System
« Reply #2 on: September 05, 2005, 10:07:12 PM »

My system has an alarm sound that beeps
about 5 times every half hour to an hour.
What can be causing this?  I have tested
all the sensors, and door alarms, and they
all work.  Can't seem to get rid of that
horrible alarm sound that goes off.  It's
like a horn sound.  Any ideas?
Logged

sherry

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: X10 Powerhouse- supervised Security System
« Reply #3 on: September 05, 2005, 10:12:21 PM »

It is strange that all your lights on your
console are slow flashing.  I had one do
that, and I had to reprogram it.  Now it
does not flash.
Logged

sherry

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: X10 Powerhouse- supervised Security System
« Reply #4 on: September 06, 2005, 04:19:16 PM »

I solved my problem.  If you are receiving
the 5 chimes every 30 minutes or so, try
this step by step.
(1) Unplug base station (or main Unit) from
the wall socket and also unhook battery
underneath. The battery is a square 9 Volt
battery. Wait about a minute and plug the
battery back in and put on the cover. Plug
in the power cord to the wall.
(2) There are 2 dial buttons on the main
unit. The top one is black and is called
unit. The bottom one is red and is called
house. Just so we are all together on this,
turn both straight up and down which would
make them 1 and A. Put the slide switch to
install. (You might want to carry a pen and
paper so you can write down what number the
alarms are.) Find the closest motion
detector and make it go off. You will hear
a ding and the first number will light up.
Go to the next door or window and press the
test button. The next light will light up
and you will hear a ding. This will be your
second alarm. Go down the line and do every
door or sensor and write down the number of
the alarm so you will have it for future
reference. This should get rid of that 5
chime nuisance every 30 minutes.
Logged

iceblue

  • Sr. Member
  • ****
  • Helpful Post Rating: 0
  • Posts: 87
Re: X10 Powerhouse- supervised Security System
« Reply #5 on: September 06, 2005, 05:05:30 PM »

Credit for the Smoke Detector innovation
noted below goes to JAMES (latest post of
this method 8/21/05)
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.