Please login or register.

Login with username, password and session length

Author Topic: Unit code problem  (Read 3070 times)

tomb

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 8
Unit code problem
« on: November 17, 2005, 12:59:15 PM »

I've got a light that is set to L6.   It
turns on and off via L6 as it's supposed to.

Problem is, it also comes on if I turn on L8.
Turning off L8 does not turn off the L6 light.

Moving the misbehaving light to *any* other
unit code works fine.   It's only on L6 that
it decides to turn on with L8.


Any idea what this might be?  (L6 is a ws4777
3 way and L8 is a ws467.

Thanks,
Thomas
Logged

gil shultz

  • Sr. Member
  • ****
  • Helpful Post Rating: 4
  • Posts: 139
Re: Unit code problem
« Reply #1 on: July 12, 2007, 11:45:06 PM »

Good Evening,

You have a bad unit.  The alignment is off or one or more of the component tolerances has drifted.  To prove this plug in a different unit.  There are other possibilities but this is the most probable.

Good Luck
Gil Shultz
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.