Old Active Home Features

[rj]

I'd like to see features similar to the old
active home cm11 software.

1. Compare software in Hardware Interface to PC
2. Check/Update status of modules manually.
(although I can see the status of a switch
change when I control it from a wireless
keypad. The staus of modules when the
software starts up is not updated.)

3. Would like to take a step back with an UNDO
button (Edit Undo?)

[X10 Pro]

Thanks, RJ. I'll see what we can do with
these. I think your number 1 is something a
few other users would like to see.

[Charles Sullivan]

RJ,
The "Compare Software in Hardware interface
to PC" in the old ActiveHome did not actually
do that - AH merely kept track of the last
file downloaded.

It would be nice if the capability existed in
the CM15A to read back the contents of the
EEPROM for a true comparison. Or lacking that
a small data area of 16 or 32 bytes which
could be written and read back by software.
But unless that capability is already built
in, a change in the firmware (and maybe the
actual CM15A circuitry as well) would be
required.

[X10 Pro]

The CM15A memory can be read by the PC, so
implementing a complete comparison is possible.

[Henri T]

I'd like to see this feature similar to the
old  active home cm11 software :

- Possibility to print the labels of each
kind of controlers