Please login or register.

Login with username, password and session length

Author Topic: On, Off and 0% Absolute  (Read 4316 times)


  • Hero Member
  • *****
  • Helpful Post Rating: 28
  • Posts: 1072
  • Roger H.
On, Off and 0% Absolute
« on: August 22, 2005, 02:30:48 PM »

In addition to the current Absolute, DIM
and Bright buttons for dimmable modules, I
would like to see a "Switch" button which
sends either an ON or OFF command.
Currently the only way to send an ON
command to a lamp is to create a dummy
appliance module at the same address and
use it to turn the lamp on.

The "Absolute 0%" could then be changed to
dim the lamp to 0% rather than turning it
off.  Although not needed for 2-way (and
third party), it would be nicer for
standard modules and wall switches than
using the DIM -99%.
Logged | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 All rights reserved.