Please login or register.

Login with username, password and session length

Author Topic: configuring a macro  (Read 11643 times)


  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
configuring a macro
« on: October 20, 2005, 09:20:16 AM »

Can someone please instruct me on how to
set up a macro in Activehome Pro to start a
camera and video after motion is detected.
Detailed instruction would be appreciated.


  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: configuring a macro
« Reply #1 on: October 29, 2005, 08:36:02 PM »

In addition to Active Home Pro, you need to
purchase the iWitness software, usb/video
sender and other components to use a camera
with a motion sensor. As for the Macro,
after purchasing & installing iWitness, on
the left of the screen in Active Home Pro
you will see the "Macros" bar with a + ,
click on the + and that will start the Macro
designer. If you need more help, go to top
left of screen and click on "file" then
click open. there should be a file
called "video sample" click on that for a
good reference. Hope this helps !
Logged | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 All rights reserved.