Please login or register.

Login with username, password and session length

Author Topic: Signal Loss  (Read 14030 times)


  • Guest
Signal Loss
« on: December 27, 2005, 10:51:10 AM »

Does anyone else have a problem getting and
keeping a good wireless signal?  From
Wireless Cameras to just the Video Sender,
I get tons of interferences on every
setting.  It might come in really good,
except for a line down the middle?  


  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 13
Re: Signal Loss
« Reply #1 on: December 27, 2005, 08:13:19 PM »

Just my $.02,,,,  I have put these systems
in stores that have the Main wires run
through conduit, this has caused some
interference in some cases. I found that
raising or lowering the camera a bit helps
to even out the signal. A little tweaking
on the cameras and or receiver can just be
a " test and tune " that in some cases mght
take a min or two. It's well worth it in
the end. I hope this helps some.

joe b.

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Re: Signal Loss
« Reply #2 on: February 19, 2006, 07:00:45 PM »

I found both types of network wireless
routers (B and G) to interfere with X10
cameras, especially if located near the
receivers.  Seems like they need to be at
least 30 feet away.
Logged | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 All rights reserved.