Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: HR12A do I need to do something? or does it work after putting in the battries?  (Read 3293 times)

Grikl

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
HR12A do I need to do something? or does it work after putting in the battries?
« on: March 10, 2006, 05:31:51 AM »
My computers cm15a can turn on and off lights but the HR12A does not do anything.
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: HR12A do I need to do something? or does it work after putting in the battries?
« Reply #1 on: March 10, 2006, 03:21:49 PM »
Once you have placed in the batteries in the "rightway". You have to set the house code dial to the letter that your system is using.Tthen be sure the selector switch is in the right position for the codes you want  eg 1-8 or 9-16  ;)
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

WinS

  • Sr. Member
  • ****
  • Helpful Post Rating: 14
  • Posts: 106
Re: HR12A do I need to do something? or does it work after putting in the battri
« Reply #2 on: March 10, 2006, 03:47:08 PM »
Also, don't forget to set the hardware configuration to transceive the house codes you are using from the HR12A.  (In AHP, TOOLS/HARDWARE CONFIGURATION.......TRANSCEIVED HOUSECODE)
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: HR12A do I need to do something? or does it work after putting in the battries?
« Reply #3 on: March 10, 2006, 06:26:34 PM »
Hey good catch WinS! thats most likely it! ;)
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

Grikl

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
Re: HR12A do I need to do something? or does it work after putting in the battries?
« Reply #4 on: March 10, 2006, 08:48:36 PM »
Hey that almost worked! the switch goes up and mdown now but it dosent acually turn it on or off.
what else am I doing wrong? :-(
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: HR12A do I need to do something? or does it work after putting in the battries?
« Reply #5 on: March 10, 2006, 09:23:22 PM »
Ok if you can get it to move the switches in AHP but no light actualy goes on then you have to got to hardware configuration and set the transcieved house codes so it includes the house code of your lights click either specific and enter the code or click auto and it should pick it up. Don't forget to update the interface and save your changes
Logged
Please Read Topic:
General Forum Etiquette
Before you post!
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.