Please login or register.

Login with username, password and session length

Author Topic: using a Harmony 880 remote  (Read 4706 times)

paul nijak

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
using a Harmony 880 remote
« on: December 12, 2005, 01:41:18 PM »

does anyone have experience using the
harmony 880 remote control macros to
control x-10?  if so how do I do it??
Logged

mike

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Re: using a Harmony 880 remote
« Reply #1 on: December 13, 2005, 07:25:17 AM »

Yes. I bought one, but I returned it because
you need a converter to transmit IR signals
to RF signals. In other words, it does not
transmit RF signals. (X10 sells an IR signal
converter).
Logged

paul nijak

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: using a Harmony 880 remote
« Reply #2 on: December 13, 2005, 11:19:22 AM »

I have the IR 543.  I have figured out how
to turn individual devices on and off and
even dim them, but i can't figure out how
to tell them to all dim at once and stop at
certian point every time.  
Logged

adam dworsky

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Re: using a Harmony 880 remote
« Reply #3 on: January 20, 2006, 11:59:22 PM »

To get them to all dim at once, you need
scene compatible dimmers and then you send
out the command to the scene address (so the
theory goes). But please confirm the Harmony
to IR-543 to switches works. I can't seem to
set up the control through the web site. How
did you do that?
Logged

paul nijak

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: using a Harmony 880 remote
« Reply #4 on: January 21, 2006, 10:39:36 AM »

the 880 website has a divice called "X10"
This will control individual dimmers or is
also has a device called "IR543"  This
device will also control individual
dimmers.  Since my last post, I have
discovered if I use my ir543 divice on my
880 remote, I can push the numbers of each
dimmer sequently and control them all with
the volume button.  
Logged

evilarab

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Re: using a Harmony 880 remote
« Reply #5 on: March 29, 2006, 11:15:49 AM »

Paul,
can your provide details on how you got your harmony to control your x10 devices.
also how can i get it to transmit at 433.92 MHz?

thanks

Logged

Rocket J Squirrel

  • Sr. Member
  • ****
  • Helpful Post Rating: 2
  • Posts: 81
Re: using a Harmony 880 remote
« Reply #6 on: April 02, 2006, 04:15:40 PM »

Has anyone tried the Harmony 890? It has RF capability, but it's unclear to me whether it can transmit to X10 transceivers.
Logged

roger1818

  • Hero Member
  • *****
  • Helpful Post Rating: 28
  • Posts: 1072
  • Roger H.
Re: using a Harmony 880 remote
« Reply #7 on: April 04, 2006, 11:03:24 AM »

Has anyone tried the Harmony 890? It has RF capability, but it's unclear to me whether it can transmit to X10 transceivers.

To the best of my knowledge, the 890 does not transmit X10 RF signals and you still need to use an IR543.  Personally I prefer using the IR543 since it allows you to group lights together (as Paul describes) and you get better control when dimming.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.