Please login or register.

Login with username, password and session length

Author Topic: Video Sender IR Control Not Working with my R10 DirecTV DVR  (Read 13207 times)

Zenara25

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Video Sender IR Control Not Working with my R10 DirecTV DVR
« on: April 13, 2006, 04:48:40 PM »

I want to be able to change channels with the free remote I just recieved with my video sender.

I'm having problems getting the IR Control to work. On the back of my satellite R10 DVR the only connection that could fit is a serial port. So I plug in the IR blaster cord into the serial port and into the Video Sender 'Sender' part. But after I do that I get no video and audio signal.

Is my Satellite DVR not compatible with the IR blaster? Is there a way to get it to work?
Logged

Zenara25

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Re: Video Sender IR Control Not Working with my R10 DirecTV DVR
« Reply #1 on: April 14, 2006, 03:22:28 PM »

Solved my own problem.

Only because I just happened to have an old IR Blaster that came with an old Hughes Directv reciever. I think you can find these on ebay. I connected it to the Video Sender 'Sender' and the other end I taped to the front of my Directv R10 DVR. And now I can control it with my free X10 remote control (after setting it up by entering one of the DVR codes for Tivo '371').
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.