Please login or register.

Login with username, password and session length

Author Topic: macro dusk time delay start not working PROPERLY  (Read 7794 times)

JERRY VARN

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
macro dusk time delay start not working PROPERLY
« on: April 13, 2006, 04:01:35 PM »

IF YOU ADD A 15 MINUTE BEFORE TO THE DUSK TIME IT FAILS TO ACT ON IT , IT CONTINUES TO START AT ITS NORMAL TIME . ANY ONE SEEN THIS ONE. ????
I'M HAVE V-3.203 INSTALLED
Logged

Mystyx

  • Hero Member
  • *****
  • Helpful Post Rating: 3
  • Posts: 201
  • eye see you
Re: macro dusk time delay start not working PROPERLY
« Reply #1 on: April 15, 2006, 03:24:46 PM »

I have timers on 15min & others 30min ect before dusk...   you need a command before delays in a macro to delay from something?
Logged
Anything is Possible, NOW!! But What can I afford?!
I Can't Afford Time, cause Money is so Important!!

JERRY VARN

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
Re: macro dusk time delay start not working PROPERLY
« Reply #2 on: April 20, 2006, 05:40:32 PM »

I UNDERSTAND ABOUT DELAYS WITHIN THE BODY OF A MACRO. THATS
NOT THE PROBLEM.
IF YOU CLICK ON DUSK OR DAWN FOR THE START TIME OF A MACRO , IT HAS A DUSK DELAY TIME BOX WITH A BEFORE OR AFTER , THATS WHAT I
CAN'T MAKE WORK. I HOPE THAT MAKES IT A LITTLE CLEARER , THANK FOR YOUR REPLY AM AWAITING ANY ANSWERS YOU MIGHT HAVE TO THIS PROBLEM.
Logged

roger1818

  • Hero Member
  • *****
  • Helpful Post Rating: 28
  • Posts: 1072
  • Roger H.
Re: macro dusk time delay start not working PROPERLY
« Reply #3 on: April 20, 2006, 08:54:13 PM »

I have never had a problem with the dusk delay.  Then again all of my dusk timers are on modules, not macros.  If you do a dusk/dawn delay on a module timer does it work properly?
Logged

Mystyx

  • Hero Member
  • *****
  • Helpful Post Rating: 3
  • Posts: 201
  • eye see you
Re: macro dusk time delay start not working PROPERLY
« Reply #4 on: April 20, 2006, 10:08:03 PM »

Quote
IF YOU CLICK ON DUSK OR DAWN FOR THE START TIME OF A MACRO , IT HAS A DUSK DELAY TIME BOX WITH A BEFORE OR AFTER , THATS WHAT I
CAN'T MAKE WORK. I HOPE THAT MAKES IT A LITTLE CLEARER


This is what I mean...  I have 3 lights, one set to 30min before Dusk, one at 35min and one at 40min and they turn off at 1:30am if I don't turn them off.

Under Dusk Delay
ON | 30min | *Before || 50% dim || & all days are selected
Do you try this using store in interface or PC mode?

I don't use on | at night though |

There could be a problem then with dusk on macros? or its settings? but the timer designer works?

« Last Edit: April 20, 2006, 10:36:18 PM by Mystyx »
Logged
Anything is Possible, NOW!! But What can I afford?!
I Can't Afford Time, cause Money is so Important!!
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.