Please login or register.

Login with username, password and session length

Author Topic: Run Macro Every 10 minutes  (Read 2617 times)

rayishome

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 10
Run Macro Every 10 minutes
« on: June 11, 2006, 07:08:39 PM »

I'm trying to figure out how to run a process every 10 mins.  I have a light that I want to turn off every 10 mins.  I setup a macro with a delay of 10 mins after turning the light off then sending an application modual command for the same code as the macro trigger.  This doesn't seem to work.  Any ideas.
Logged

roger1818

  • Hero Member
  • *****
  • Helpful Post Rating: 28
  • Posts: 1072
  • Roger H.
Re: Run Macro Every 10 minutes
« Reply #1 on: June 13, 2006, 04:37:34 PM »

I'm trying to figure out how to run a process every 10 mins.  I have a light that I want to turn off every 10 mins.  I setup a macro with a delay of 10 mins after turning the light off then sending an application modual command for the same code as the macro trigger.  This doesn't seem to work.  Any ideas.

Make sure the dummy module you use to send the Macro On command is an appliance module.  Lamp modules will send a series of Bright commands instead of an on command and won't trigger the macro.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.