Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[mrhoaf]

I need to control 4 appliance modules from another program.  Is there any way I can turn a module on and off with a command line command?  I know this was possible with the older activehome, but I haven't found anything about this option in Pro.

heck, any way to control modules through the CM15A without the activehome pro interface would be a step in the right direction...

[Dan Lawrence]

Bill's X10 Voice Commander (http://www.wgjohns.com/bxvc.htm) allows voice control though AHP, but AHP doesn't have to be open.  It's freeware and pretty neat.

[billy]

Check out the SDK.
http://www.activehomepro.com/sdk/sdk-info.html

[Tuicemen]

As billy stated

Check out the SDK.
http://www.activehomepro.com/sdk/sdk-info.html

syntax is <ahcmd><sendplc or sendrf><housecode & unitcode><ON or OFF>

[mrhoaf]

As billy stated

Check out the SDK.
http://www.activehomepro.com/sdk/sdk-info.html

syntax is <ahcmd><sendplc or sendrf><housecode & unitcode><ON or OFF>

thanks!  That's exactly what I needed!

[Tuicemen]

Your welcome! If you just want to turn off/on then you may not need the SDK ahcmd.exe is shipped and instaled with AHP in C:\Program Files\Common Files\X10\Common

[Dan Lawrence]

Error: ahcmd.exe cannot be used as a command line program in XP. It does not recogize it, even with the syntax Billy posted.

[Tuicemen]

I have no problem using it! Open a doss window in the folder AHCMD.exe is located then type the Syntax above It will work! or if your trying from a batch file make sure you point to the folder AHCMD is in.

[Dan Lawrence]

Still nothing, except "achmd is not recognized as a program, execuctable or batch file".

[billy]

Still nothing, except "achmd is not recognized as a program, execuctable or batch file".

Dan,

It should "ahcmd.exe" not achmd.exe", just remember Active Home Command.

[Dan Lawrence]

Same error message: "Ahcmd is not recognized as a program, executable, or batch file". It occors in both a command window or a full command screen.

O/S is XP Home SR2

[billy]

Dan,

1. Create a new folder "C:Test' or whatever name.
2. Goto C:Program FilesCommon FilesX10Common
3. Right click on the file "ahcmd.exe", select "Copy" from the menu.
4. Back in the "C:Test" window, right click in the open area of the window and select "Paste" NOT "Paste Shortcut".
5. Open a Command Prompt window. ( Start - Programs - Accessories - Command Prompt)
6. In the Command Prompt window type cd c:   est press (enter).
7. Type dir press (enter)
8. You should see ahcmd.exe with a size of 61,440.
9. Type ahcmd press (enter)  you should see expecting: {sendplc | sendrawplc | sendrf | queryplc}
10. Try a command.    ahcmd sendplc a1 on

Caution: queryplc does not work!

Good Luck!

[specter333]

THANK YOU!  I finally figured out how to u se Realize Voice to control my X10 products.  I’ve read a lot of post and tried a lot of things over the past couple of weeks but I guess I was looking in the wrong place.

One question if you don’t mind.  I understand that sendplc is send power line command,  sendrf is send radio frequency command but what is sendrawplc?

Thanks again.

[Dan Lawrence]

Dan,

1. Create a new folder "C:\Test' or whatever name.
2. Goto C:\Program Files\Common Files\X10\Common
3. Right click on the file "ahcmd.exe", select "Copy" from the menu.
4. Back in the "C:\Test" window, right click in the open area of the window and select "Paste" NOT "Paste Shortcut".
5. Open a Command Prompt window. ( Start - Programs - Accessories - Command Prompt)
6. In the Command Prompt window type cd c:\test press (enter).
7. Type dir press (enter)
8. You should see ahcmd.exe with a size of 61,440.
9. Type ahcmd press (enter)  you should see expecting: {sendplc | sendrawplc | sendrf | queryplc}
10. Try a command.    ahcmd sendplc a1 on




Caution: queryplc does not work!

Good Luck!

THAT WORKED!!!!!

I  presume that will also work with ahcmd in it's regular location, since it worked fine in the C:/Test location.

[specter333]

I'm understanding the on, off, dim and bright commands but I'm not understading the presetdim command.  For instance what would be the presetdim command for a1 to 50%?

Thanks