Topic: How to turn all lights/units off at a specific time (no trigger from module) (Read 5054 times)

mleger · « **on:** May 27, 2006, 07:47:50 AM »

I have AHP and Smart Macros .. and I would like to ensure that at a specific time at night, a macro (or timed event) occurs to turn off ALL Lights / Units. The trigger is not from a module, but from a specific time. Not sure if I'm missing something ... as this seems pretty simple (IF 11:30PM Daily, Turn Off All units). Any suggestions I'ld appreciate.

steven r · « **Reply #1 on:** May 27, 2006, 09:09:35 AM »

Easiest way is from a timed macro. eg. I have a somewhat involed one that dims key lights as 5 minute warning before leaving me in the dark. It then shuts off everything including lights, the coffee pot and closes the garage door. I can push a button for the macro as well as it has timers to run at 1:05am and 9:30am. A macro can be as simple as one "ALL UNITS OFF" command, however.

Simply start with a macro with an "ALL UNITS OFF" in it for the HC you want and add a timer for 11:30pm daily.

mleger · « **Reply #2 on:** June 06, 2006, 06:25:51 PM »

Got it. Thanks for the direction .... I didn't realize I could time a macro .... as I thought the trigger event was the only way. Works like a charm now.

News:

Author Topic: How to turn all lights/units off at a specific time (no trigger from module) (Read 5054 times)

mleger

How to turn all lights/units off at a specific time (no trigger from module)

steven r

Re: How to turn all lights/units off at a specific time (no trigger from module)

mleger

Re: How to turn all lights/units off at a specific time (no trigger from module)