Please login or register.

Login with username, password and session length

Author Topic: Rex-10 Barking Dog Alarm  (Read 11828 times)

uptownvideo

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 15
Rex-10 Barking Dog Alarm
« on: June 09, 2006, 07:51:57 AM »

I want know if this Barking Dog Alarm will work with the Radio Shack Plug n Power 49-1000 alarm system.  I plan on plugging it in to an appliance module set to my house code security code.  I would like it triggered when the alarm sounds. 

Thanks for any help.
Logged

Walt2

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 28
  • Posts: 787
Re: Rex-10 Barking Dog Alarm
« Reply #1 on: July 02, 2007, 03:08:13 PM »

You don't need to plug the Rex-10 RoboDog into an appliance module.  Just set it to the house and unit code you would have used for the appliance module, and it will trigger whenever it "sees" an on command.
Logged
* Sears Home Control System, Radio Shack Plug 'n Power, NuTone, Stanley LightMaker, BSR, HomeLink.
* Tecmar Device Master, CP290 (LightHouse), CM11A (AH), CM14A (AH2), CM15A (AHPro).

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: Rex-10 Barking Dog Alarm
« Reply #2 on: July 02, 2007, 07:53:05 PM »

Where is all the RoBo dog posts coming from? Has someone found a source for these? Are they back?
« Last Edit: July 03, 2007, 04:37:59 PM by Dave_x10_L »
Logged
Home Automation is an always changing technology

Dan Lawrence

  • Hero Member
  • *****
  • Helpful Post Rating: 68
  • Posts: 3991
Re: Rex-10 Barking Dog Alarm
« Reply #3 on: July 02, 2007, 10:04:38 PM »

Apparently SmartHome sells them, at least according to Google.
Logged
I don't SELL this stuff... BUT I sure do ENJOY using it!!!

Charles Sullivan

  • Hero Member
  • *****
  • Helpful Post Rating: 94
  • Posts: 1565
    • HEYU - X10 Automation for Linux, Unix, and Mac OSX
Re: Rex-10 Barking Dog Alarm
« Reply #4 on: July 02, 2007, 10:23:30 PM »

Apparently SmartHome sells them, at least according to Google.

Smarthome may have sold them at one time, but now their web page says they're not available.

Logged
Yesterday it worked.
Today it doesn't work.
X10 on Windows is like that.

HEYU - X10 Automation for Linux, Unix, and Mac OS X     http://www.heyu.org

TakeTheActive

  • Hero Member
  • *****
  • Helpful Post Rating: 126
  • Posts: 1047
  • Old !@#$% Tinkerer!
Re: Rex-10 Barking Dog Alarm
« Reply #5 on: July 03, 2007, 01:18:54 AM »


Where is all the RoBo dog post coming from? Has someone found a source for these? Are they back?

I'm going to point my finger at Walt2 :o ;)

From and including: Friday, June 9, 2006
To and including: Monday, July 2, 2007

It is 389 days from the start date to the end date, end date included

Or 1 year, 24 days including the end date
Alternative time units
389 days can be converted to one of these units:

    * 33,609,600 seconds
    * 560,160 minutes
    * 9336 hours
    * 55 weeks (rounded down)


Reference: time and date.com: Duration calculation results
Logged
Low Post Count != Low Knowledge - High Post Count != High Knowledge ;)

ADVICE TO X-10 NEWBIES FROM AN X-10 OLD-TIMER

Walt2

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 28
  • Posts: 787
Re: Rex-10 Barking Dog Alarm
« Reply #6 on: July 03, 2007, 07:18:04 AM »

Where is all the RoBo dog post coming from? Has someone found a source for these? Are they back?

There are several up for auction on eBay. 

I just got one, and played around with it for a few days.  While I still have questions myself, I have figured out somethings and can offer answers to other's questions.

I look at these forums as a repository of knowledge.  Knowledge doesn't become obsolete.  So, answering an older question is good because it might allow someone else, who is searching for an answer in the future, to find it.
Logged
* Sears Home Control System, Radio Shack Plug 'n Power, NuTone, Stanley LightMaker, BSR, HomeLink.
* Tecmar Device Master, CP290 (LightHouse), CM11A (AH), CM14A (AH2), CM15A (AHPro).

Walt2

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 28
  • Posts: 787
Re: Rex-10 Barking Dog Alarm
« Reply #7 on: July 03, 2007, 07:19:42 AM »

I'm going to point my finger at Walt2 :o ;)

Yep, guilty.   ;D

I just got one, and was searching thru here for answers, though I seem to have found more questions, than answers.
Logged
* Sears Home Control System, Radio Shack Plug 'n Power, NuTone, Stanley LightMaker, BSR, HomeLink.
* Tecmar Device Master, CP290 (LightHouse), CM11A (AH), CM14A (AH2), CM15A (AHPro).

Charles Sullivan

  • Hero Member
  • *****
  • Helpful Post Rating: 94
  • Posts: 1565
    • HEYU - X10 Automation for Linux, Unix, and Mac OSX
Re: Rex-10 Barking Dog Alarm
« Reply #8 on: July 03, 2007, 08:33:46 AM »

Where is all the RoBo dog post coming from? Has someone found a source for these? Are they back?

There are several up for auction on eBay. 

I just got one, and played around with it for a few days.  While I still have questions myself, I have figured out somethings and can offer answers to other's questions.

I look at these forums as a repository of knowledge.  Knowledge doesn't become obsolete.  So, answering an older question is good because it might allow someone else, who is searching for an answer in the future, to find it.

I have personally not had the best of luck with X10 components from eBay (when purchased from other than regular X10 retailer stores).  Many turned out to have intermittent problems or quirks of one sort or another.

Logged
Yesterday it worked.
Today it doesn't work.
X10 on Windows is like that.

HEYU - X10 Automation for Linux, Unix, and Mac OS X     http://www.heyu.org
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.