Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Two Way Modules  (Read 4308 times)

BudWah

  • Full Member
  • ***
  • Helpful Post Rating: -1
  • Posts: 29
Two Way Modules
« on: June 16, 2006, 08:33:15 PM »
Hey Now * * * I have two older 'Two Way Lamp Modules' ... # LM465 ...

Also Camera XC22A...???

Will these work with my AHP programming ...

I also have 'Socket Rockets' that just don't work at all...???

If so, what are their ahp listing #'s, so that I can program them in... ???

Thanks for the quick reply... Budwah
« Last Edit: June 16, 2006, 08:54:07 PM by BudWah »
Logged
Learn To Live / Live To Learn

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Two Way Modules
« Reply #1 on: June 17, 2006, 06:41:57 AM »
LM465 is not a two way module. X10Pro PAM21 and PAM22 are two way. Are they in the AHP Choices?

Socket Rocket. LM15a. I have seen indications that programming them maybe added to AHP [if not there yet]. For now most folks write a macro that sends the needed three X10 On codes in the first 30 seconds of applied power. To program them. Many use a Tabletop Controller for now.
Logged

BudWah

  • Full Member
  • ***
  • Helpful Post Rating: -1
  • Posts: 29
Re: Two Way Modules
« Reply #2 on: June 18, 2006, 05:30:27 AM »
hey Now* * *  One more time with this...

LM465 'IS' a 'Lamp Module' ...

Will it work with AHP or is it too old???

Will the 'Socket Rocket' Work with AHP ???

Budwah
« Last Edit: June 18, 2006, 05:34:48 AM by BudWah »
Logged
Learn To Live / Live To Learn

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Two Way Modules
« Reply #3 on: June 18, 2006, 10:12:24 AM »
You said a "Two Way Module" and the LM465 is NOT two way.
Yes it is a lamp module and should be in AHPs list of modules. The Socket Rocket I believe is in the list also; just I have not seen any easy way to program it. If your modules are not working with AHP try them in a different outlet. If they then work you have a signal strength problem or a phase coupling problem. If by chance it is from an RF remote. Double check in AHP that the tranceived house code for the modules is set to be tranceived.
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Two Way Modules
« Reply #4 on: June 19, 2006, 12:23:22 PM »
Logged
"This aftershave makes me look fat"
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.