Topic: have 3 cameras going now have static ??? (Read 5304 times)

GMBAL4 · « **on:** August 02, 2006, 06:49:52 PM »

hey guys I got my third camera in today and when they are all going I get a lot of static each channel are on there own letter
camera 1 on A
camera 2 on B
camera 3 on C
and now I can`t get it to come in clear now if I move the receiver around I can get each channel to come in clear??
should I get a new receiver ??
thanks for the help

Brian H · « **Reply #1 on:** August 02, 2006, 06:51:57 PM »

You have three wireless cameras on at the same time on different channels or three on a different House Code?

GMBAL4 · « **Reply #2 on:** August 02, 2006, 07:06:11 PM »

okay Brian I`m stupid what is a house code?? I have each camera on there own letter 1 camera on a 2 n b and 3 on c
I hope that this is correct?? house code I think is set to 1

Dan Lawrence · « **Reply #3 on:** August 02, 2006, 07:59:25 PM »

Housecodes are A thru P, uniits are 1-16.

GMBAL4 · « **Reply #4 on:** August 02, 2006, 10:27:20 PM »

Then yes I have 3 cameras on different house codes is this correct??

GMBAL4 · « **Reply #5 on:** August 03, 2006, 12:36:43 PM »

ANYBODY

steven r · « **Reply #6 on:** August 03, 2006, 12:41:23 PM »

I'm not a camera expert but I believe that you need to keep all your cameras on the same channel as the receiver.

GMBAL4 · « **Reply #7 on:** August 03, 2006, 02:24:24 PM »

they are onthe same channel as the receiver

Tuicemen · « **Reply #8 on:** August 03, 2006, 03:08:50 PM »

GMBAL4: set all three cams to one housecode (same code for each) then set each to there own unit number eg. 1,2 & 3. Check under the rubber plugs of each cam that they are all set to the same channel as on the bottom of the receiver. eg. a,b,c,or d

Brian H · « **Reply #9 on:** August 03, 2006, 04:39:51 PM »

House Code as mentioned is the A-P dial on the power supply. The units are 1-16. Keep all of them in a group of four for the unit codes. Like 1-4;5-8;9-12 or 13-16. That way when one in the group is turned on the other three [if you had 4] would turn off. Only one camera can be on at a time. Also as mentioned all on the same channel A-D under the rubber plug and A-D on the receiver to match the cameras channel.

GMBAL4 · « **Reply #10 on:** August 03, 2006, 05:47:15 PM »

okay i am a knucle head

I did not have the unit set correctly now that I do the cameras work and SWITCH perfectly. Now I `ll just save up and by the new Sentinel that just came out

PS: thanks for the help everyone!!

Brian H · « **Reply #11 on:** August 03, 2006, 06:33:10 PM »

Glad you found it and it is now working.

News:

Author Topic: have 3 cameras going now have static ??? (Read 5304 times)

GMBAL4

have 3 cameras going now have static ???

Brian H

Re: have 3 cameras going now have static ???

GMBAL4

Re: have 3 cameras going now have static ???

Dan Lawrence

Re: have 3 cameras going now have static ???

GMBAL4

Re: have 3 cameras going now have static ???

GMBAL4

Re: have 3 cameras going now have static ???

steven r

Re: have 3 cameras going now have static ???

GMBAL4

Re: have 3 cameras going now have static ???

Tuicemen

Re: have 3 cameras going now have static ???

Brian H

Re: have 3 cameras going now have static ???

GMBAL4

Re: have 3 cameras going now have static ???

Brian H

Re: have 3 cameras going now have static ???