Trouble with the Robotic Ninja

[cardude]

I ordered an x10 Robotic Ninja a while back and I was under the impression that it could move to the preset positions when an eagle eye motion sensor turned on. I already have an audio video receiver, transceiver, and video rec. set up. I also have three b/w night cameras and a floodcam. I mounted one of the b/w cameras on the Robotic Ninja because I need it to cover my car. The Floodcam provides the light I need and rec. the front of the car, but I need the other b/w cam w/ robotic ninja to be able to watch all the other sides. I'm new to this stuff so if anyone could provide me with some info, I would greatly appreciate it.

[JimC]

I ordered an x10 Robotic Ninja a while back and I was under the impression that it could move to the preset positions when an eagle eye motion sensor turned on

I do not believe you can move the Ninja to a preset with just a motion sensor. I think that will require additional software and possibly hardware. I use AHP and a CM15A for this and it works fine.

Jim

[cardude]

thanks for the response. Darn I didn't want to buy anymore things. Besides if I bought the software, it would need to be connected to the computer. huh? what do those abbreviations mean?

[JimC]

what do those abbreviations mean

If you are referring to CM15A and AHP, check out the following link.

http://www.x10.com/activehomepro/activehome-pro.html

With the CM15A and AHP you do not have to have the computer on to have the Ninja go to a preset when motion is detected. The information is stored in the CM15A