Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[lynnymoore]

The SH624 worked fine the first day!

The next day it started lighting two different lights when I turned on a lamp module instead of the one I pushed.
I turn a lamp off and another one turns on then off a few seconds later or sometimes stays on altogether.

While one of my lights will not turn on at all now...no matter what I do.

It's not like a have a lot of them. This is three lamp modules I am talking about. I even took all the windows and doors offline thinking they were complicating matters. Nada.

I assumed a lot about this system it seems. Is anyone out there successfully using the x10 system in their home for security and automation? If so, what's the secret?

I am starting to get upset since I just spent a bundle of money on this.

[TakeTheActive]

The SH624 worked fine the first day!

...I am starting to get upset since I just spent a bundle of money on this.

...I assumed a lot about this system it seems.

Is anyone out there successfully using the x10 system in their home for security and automation?

If so, what's the secret?

I am! For almost 30 years... 

Set aside a good-sized block of time (ranging from several hours to several days), and start reading here: TTA's X10 Troubleshooting Tips Thread  (Read 288 times)

Follow *ALL* the LINKs and read them too! 

When you've mapped out your circuits and gone through the Troubleshooting Flowchart, come back and we'll see where you're at. 

[lynnymoore]

Thanks for the great links and advice Old Timer! I will...when I have time.