Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[scottmc]

I see the PSC01 interface that will accept a dry contact or low voltage input and convert to X.10 signal, but is there anything that does the reverse (as dry contacts or low voltage, rather than 110 vac)?  Thanks.

[Brian H]

The X10 UM506 and X10Pro PUM01.
Can take an X10 power line command and has a low voltage dry contact output and a sounder.
It can be set to a sounder only, both or dry contact only output.
Continuous On and Off or an On can trigger about a three second output and it then times out.
Manuals are available on the sales pages.
https://www.x10.com/collections/x10-pro-appliance-modules/products/pum01
https://www.x10.com/products/um506?_pos=1&_sid=1ac5af326&_ss=r

[scottmc]

Brian H.,
Thank you.  That's awesome!  I appreciate the help.