X10 Community Forum

🔌General Home Automation => Automating Your House => Troubleshooting Automation Problems => Topic started by: fcorbin on December 07, 2006, 10:47:16 PM

Title: Certain outlets won't work?
Post by: fcorbin on December 07, 2006, 10:47:16 PM
Hello,
I am new to x10 and recently purchased a few components including AHP with a USB controller and a simple one-way lamp module.  I first set everything up in one room and quickly got control of the module.  I then move the module to another room and it won't work anymore.  I checked that the outlets are live and the adres never changes.
What am I missing?
Thanks!
Title: Re: Certain outlets won't work?
Post by: Tuicemen on December 07, 2006, 11:18:47 PM
There are a few things which it could be! Phase issues /noise/signal suckers
Read my post Topic: Having X10 AHP Problems? Please Read This First!  (Read 9949 times)    (http://www.x10community.com/forums/index.php?topic=7951.0)  Although it was put together to help Activehome Pro users the info and links are helpful to all.
If you can't find the answers there do an Advanced search   (http://www.x10community.com/forums/index.php?action=search;advanced) for each of the 3 issues I mentioned you will find the information to tell which it is and how to fix the problem!
Title: Re: Certain outlets won't work?
Post by: TakeTheActive on December 08, 2006, 12:06:49 AM
Quote from: fcorbin on December 07, 2006, 10:47:16 PM

I am new to x10... ...I first set everything up in one room and quickly got control of the module.  I then move the module to another room and it won't work anymore... ...What am I missing?

Here's some good reading material for you.  ;)