Topic: Certain outlets won't work? (Read 3814 times)

fcorbin · « **on:** December 07, 2006, 10:47:16 PM »

Hello,
I am new to x10 and recently purchased a few components including AHP with a USB controller and a simple one-way lamp module. I first set everything up in one room and quickly got control of the module. I then move the module to another room and it won't work anymore. I checked that the outlets are live and the adres never changes.
What am I missing?
Thanks!

Tuicemen · « **Reply #1 on:** December 07, 2006, 11:18:47 PM »

There are a few things which it could be! Phase issues /noise/signal suckers
Read my post Topic: Having X10 AHP Problems? Please Read This First! (Read 9949 times) Although it was put together to help Activehome Pro users the info and links are helpful to all.
If you can't find the answers there do an Advanced search for each of the 3 issues I mentioned you will find the information to tell which it is and how to fix the problem!

TakeTheActive · « **Reply #2 on:** December 08, 2006, 12:06:49 AM »

Quote from: fcorbin on December 07, 2006, 10:47:16 PM

I am new to x10... ...I first set everything up in one room and quickly got control of the module. I then move the module to another room and it won't work anymore... ...What am I missing?

Here's some good reading material for you.

MAP / MEASURE / CORRECT - be sure to read JeffVolp's two excellent articles
How to Map your Electrical Circuits (courtesy of Puck)

News:

Author Topic: Certain outlets won't work? (Read 3814 times)

fcorbin

Certain outlets won't work?

Tuicemen

Re: Certain outlets won't work?

TakeTheActive

Re: Certain outlets won't work?