X10 Community Forum
📝Reviews => X10 Hardware => Entertainment Product Reviews => Topic started by: GatorDeb on February 06, 2008, 02:51:35 PM
-
Here's my set up:
I have a PC audio to red/white RCA and a VGA/composite video (yellow plug) adapter. I plug the video and audio RCAs to the sender, and then hook up the receiver to the TV. When I go to that input, I hear a crackling noise and no video. Turning off the sender makes the noise go away, so I have it on the right input.
Help?
Thanks! :D
-
I have a PC audio to red/white RCA and a VGA/composite video (yellow plug) adapter. I plug the video and audio RCAs to the sender, and then hook up the receiver to the TV. When I go to that input, I hear a crackling noise and no video. Turning off the sender makes the noise go away, so I have it on the right input.
1st step is make sure both the sender and receiver are on the same channel (A through D). Try repositioning the sender-receiver units, make sure the transmission path is as direct, and object free as possible.