X10 Community Forum
🖥️ActiveHome Pro => ActiveHome Pro General => Topic started by: birdzeye on September 19, 2011, 05:13:10 PM
-
Hi,
For some reason I can't turn on or off one of my socket rockets from my computer, via the CM15A. It was working well before, but now it's just this one socket rocket light switch that won't work. I've tried changing socket rockets and it still won't work. I can turn it on or off using the HR12A Palmpad (i.e. RF signal works). All other lights on the same phase will work. I don't know what to do. Can anyone provide any suggestions which might help?
Thanks.
-
Try that one Socket rocket in a different fixture.
Try another bulb (you ARE using only incandescent bulbs with them right?)
-
Hi,
For some reason I can't turn on or off one of my socket rockets from my computer, via the CM15A. It was working well before, but now it's just this one socket rocket light switch that won't work. I've tried changing socket rockets and it still won't work. I can turn it on or off using the HR12A Palmpad (i.e. RF signal works). All other lights on the same phase will work. I don't know what to do. Can anyone provide any suggestions which might help?
Thanks.
Birdseye you have been around for a long time. Don't you have some TM751 transceivers? If so, you might have a new noise source affecting the CM15A but not the circuit the TM751 is on.
Try plugging the TM751 in the same outlet that the CM15A was in (unplug CM15A for the test). If now the Palm Pad doesn't work, you have a noise or coupling problem...probably that new cell phone charger or the old CFL bulb in the hall.