X10 Community Forum
🖥️ActiveHome Pro => ActiveHome Pro General => Topic started by: jlp on November 06, 2011, 05:30:03 PM
-
I have a big problem with my home automation system. Since this afternoon, for any RF signal, no command from CM15a. No lamp ON or OFF. If I toggle a switch from AHP, no lamp ON or OFF.
For any RF signal (A1, L8, etc.), activity monitor -> P PanLeft (weird.....) -> no command from CM15a
If I toggle a switch from AHP, activity monitor -> A1 ON, A! OFF, L8 ON, L8 OFF -> no command from CM15a
For a command from CM15a (timer) -> lamp On or Off -> every thing seem normal
I changed CM15a, reinstalled AHP (3.10), reinstalled SDK -> same problem
Do you have an idea of my problem?
-
Try reinstalling AHP and don't install the SDK and see what happens.
-
Thanks!
I try it, but I have the same problem.
-
My son found the problem. I have a old remote camera that is not used. She had dead batteries. She gave signals, which would cause collisions. We removed the batteries and everything is ok now.
-
Good for you. I would recommend that you back up to separate media all your .ahx files in case any other problems pop up.