X10 Community Forum
📱X10 WIFI => 🗯General Discussion => Topic started by: whstoneman on February 10, 2019, 06:43:00 AM
-
Is there any way to set a timer on a "scene"?
-
not yet!
-
Hi Folks,
I was out of commission for the last year. So i loaded alex10, ahp, java, ha bridge. Devices work fine but Alexa doesnt find them. What am i missing? Thxs Mike
-
Did you enable the Philips Hue Skill in the Alexa app? If not, do that and then tell Alexa to "discover devices."
-
Hi
When i try to enable Phillips hue it cant find a bridge?
Thxs
Mike
-
Actually, I just checked my Alexa app and I don't actually have the Hue skill in there so I was wrong about that. Did you change the IP address in Alex10 Setup to match your PC's?
-
Yes, Alex10 triggers switches fine. But alexa will not find devices.
-
From T's site: Be sure your firewall is setup correctly for Java as that is the main reason Alexa doesn't discover devices. Also be sure your PC has a static IP.
Have a look at the info on Tuicemen's site here: http://forums.tuicemen.net/index.php?board=119.0
-
Thanks Brobin! Got it to work again! No what about dimming i believe there is somewhere in the ha bridge i have to do. Thxs again!
-
Thanks Brobin! Got it to work again! No what about dimming i believe there is somewhere in the ha bridge i have to do. Thxs again!
Glad that helped. I know that dimming is supposed to work but neither T nor I have played with it as we both don't use dimming. In fact, I don't use Alexa for direct control of any X10 devices. I use X10 codes to trigger events/scenes in my Stargate which takes care of any dimming.