X10 Community Forum
🖥️ActiveHome Pro => ActiveHome Pro General => Software Problems & Bugs => Topic started by: Burdy on December 10, 2004, 01:03:21 PM
-
I have a trivial macro with the condition
(It's after dusk) that rings a chime if true.
Right now its 1pm, and when I run the macro
the chime rings. If I set the condition to
(It's before dusk) the chime doesn't ring.
A similar macro with the condition (Time is
between Dusk and 11pm) executed at 1:00pm
also seems to be evaluated as true.
Am I missing something here, or is this a
known problem?
-
Just out of curiosity, if you look at the
interface status, what are the states of
flags 15 and 16?
-
Flag 15 is set, Flag 16 is clear.
It seems to act the same way whether the
macro is stored in the interface, or from
the PC.
-
How are you triggering the macro?
-
I trigger it with an RF switch.
-
Also, condition (Time is between 2:00AM and
Dawn) also appears to be true, at 4:15pm.
Something seems broken here.
-
4:15pm is NOT detween 2:00 am and dawn
-
Burdy: You have an e-mail from me.
-
ARF, that's my point. The macro runs as if
the condition is true.
-
Oh..my macros are broken that way too...I
say an A1 only turns on a light if between 9
and 10 pm, but A1 at 10:30 pm turns lights
on. Other macros, wont even execute
manually, and aren't even registered in the
Activity Log when I attempt to manually run
them. I just figure about revision 4.123
would finally fix them!
-
Oh..my macros are broken that way too...I
say an A1 only turns on a light if between 9
and 10 pm, but A1 at 10:30 pm turns lights
on. Other macros, wont even execute
manually, and aren't even registered in the
Activity Log when I attempt to manually run
them. I just figure about revision 4.123
would finally fix them!
-
Oh..my macros are broken that way too...I
say an A1 only turns on a light if between 9
and 10 pm, but A1 at 10:30 pm turns lights
on. Other macros, wont even execute
manually, and aren't even registered in the
Activity Log when I attempt to manually run
them. I just figure about revision 4.123
would finally fix them!
-
Oh..my macros are broken that way too...I
say an A1 only turns on a light if between 9
and 10 pm, but A1 at 10:30 pm turns lights
on. Other macros, wont even execute
manually, and aren't even registered in the
Activity Log when I attempt to manually run
them. I just figure about revision 4.123
would finally fix them!