Topic: Google Remote, Max10 (Read 58835 times)

lestat02882 · « **Reply #15 on:** July 26, 2007, 02:48:59 PM »

- <xml>
- <rfhiddrv weightreqd="10">
- 
- 
- 
- 
- 
- 
- 
- <app name="Example">
<appexe name="" weight="0" />
<appclass name="" weight="0" />
<apptitle name="" weight="0" />
<apptitlesearch name="" weight="0" />
- <keys>
- 
<key code="string" state="on" send="0x70" ctrl="1" alt="1" shift="1" second="0x71" />
- 
<key code="string" state="on" send="0x20" />
<key code="string" state="repeat" send="0x20" />
- 
<key name="A Menu" code="string" senda="a" ctrl="1" />
</keys>
</app>
- <app name="WinAmp">
<appexe name="winamp.exe" weight="200" />
<appclass name="Winamp v1.x" weight="20" />
<apptitle name="Winamp 5.1" weight="20" />
<apptitlesearch name="Winamp" weight="20" />
- <keys>
<key name="Play" code="Play" senda="x" />
<key name="Pause" code="Pause" senda="c" />
<key name="Stop" code="Stop" senda="v" />
<key name="Previous" code="Rewind" senda="z" />
<key name="Next" code="Forward" senda="b" />
<key name="Start of List" code="ChannelUp" senda="z" ctrl="1" />
<key name="End of List" code="ChannelDown" senda="b" ctrl="1" />
<key name="Repeat" code="Display" senda="r" />
<key name="Shuffle" code="Return" senda="s" />
<key name="Toggle Time Display" code="ABSwitch" senda="t" ctrl="1" />
</keys>
</app>
- <app name="RealPlayer">
<appexe name="realplay.exe" weight="20" />
<apptitle name="RealPlayer" weight="20" />
<appclass name="GeminiWindowClass" weight="20" />
<apptitlesearch name="RealPlayer" weight="20" />
- <keys>
<key name="Play" code="Play" senda="p" ctrl="1" />
<key name="Pause" code="Pause" senda="p" ctrl="1" />
<key name="Stop" code="Stop" senda="s" ctrl="1" />
<key name="Previous" code="Rewind" senda="r" ctrl="1" />
<key name="Next" code="Forward" senda="t" ctrl="1" />
<key name="Theater Mode" code="Display" send="0x78" />
<key name="Normal Mode" code="Return" send="0x76" />
</keys>
</app>
- <app name="Musicmatch Jukebox">
<appexe name="mmjb.exe" weight="20" />
<apptitle name="" weight="0" />
<appclass name="MMJB:MAINWND" weight="20" />
<apptitlesearch name="Musicmatch Jukebox" weight="20" />
- <keys>
<key name="Play" code="Play" senda="p" ctrl="1" />
<key name="Pause" code="Pause" send="0x13" />
<key name="Stop" code="Stop" senda="s" ctrl="1" />
<key name="Previous" code="Rewind" send="0x25" alt="1" />
<key name="Next" code="Forward" send="0x27" alt="1" />
</keys>
</app>
- <app name="RealRhapsody">
<appexe name="Rhapsody.exe" weight="20" />
<apptitle name="Rhapsody" weight="20" />
<appclass name="TEST_WIN32WND" weight="20" />
<apptitlesearch name="" weight="0" />
- <keys>
<key name="Play" code="Play" senda="p" ctrl="1" />
<key name="Pause" code="Pause" senda="p" ctrl="1" />
<key name="Stop" code="Stop" senda="s" ctrl="1" />
<key name="Previous Track" code="Rewind" senda="b" ctrl="1" />
<key name="Next Track" code="Forward" senda="f" ctrl="1" />
<key name="Shuffle" code="Display" senda="h" ctrl="1" />
<key name="Repeat" code="Return" senda="t" ctrl="1" />
</keys>
</app>
- <app name="Ulead DVD Player">
<appexe name="DvdPlayer.exe" weight="20" />
<apptitle name="Ulead DVD Player" weight="20" />
<appclass name="#32770 (Dialog)" weight="20" />
<apptitlesearch name="" weight="0" />
- <keys>
<key name="Play" code="Play" send="0x0D" />
<key name="Pause" code="Pause" send="0x20" />
<key name="Stop" code="Stop" senda="S" />
<key name="Step Backward" code="Rewind" send="0xBF" />
<key name="Step Forward" code="Forward" send="0xBE" />
<key name="Previous" code="ChannelUp" senda="p" />
<key name="Next" code="ChannelDown" senda="n" />
<key name="Subtitle" code="Display" senda="u" />
<key name="Language Select" code="Return" senda="l" />
<key name="DVD Menu" code="Menu" senda="r" shift="1" />
<key name="Chapter Menu" code="Title" senda="c" shift="1" />
<key name="Screen Toggle" code="ABSwitch" senda="w" />
</keys>
</app>
- <app name="Intervideo WinDVD">
<appexe name="WinDVD.exe" weight="20" />
<apptitle name="InterVideo WinDVD 7" weight="20" />
<appclass name="WinDVDClass" weight="20" />
<apptitlesearch name="" weight="0" />
- <keys>
<key name="Play" code="Play" send="0x0D" />
<key name="Pause" code="Pause" send="0x20" />
<key name="Stop" code="Stop" send="0x23" />
<key name="Previous" code="ChannelUp" send="0x21" />
<key name="Next" code="ChannelDown" send="0x22" />
<key name="Chapter List" code="Display" senda="c" />
<key name="Rew" code="Rewind" senda="r" />
<key name="FF" code="Forward" senda="f" />
<key name="DVD Menu" code="Menu" senda="m" ctrl="1" />
<key name="Audio Select" code="Return" senda="a" />
<key name="Toggle Full Screen" code="ABSwitch" senda="z" />
</keys>
</app>
- <app name="nVidia nVDVD">

lestat02882 · « **Reply #16 on:** July 26, 2007, 02:50:01 PM »

lestat02882 · « **Reply #17 on:** July 26, 2007, 02:50:58 PM »

<key name="Play" code="Play" send="0x20" />
<key name="Pause" code="Pause" send="0x20" />
<key name="Stop" code="Stop" send="0x20" />
<key name="FF" code="Forward" send="0x27" />
<key name="Rew" code="Rewind" send="0x25" />
</keys>
</app>
- 
- <app name="Default">
<appexe name="" weight="0" />
<appclass name="" weight="0" />
<apptitle name="" weight="0" />
<apptitlesearch name="" weight="0" />
<keys />
</app>
- 
- <!-- Virtual keys
* Virtual Keys, Standard Set
VK_LBUTTON 0x01
VK_RBUTTON 0x02
VK_CANCEL 0x03
VK_MBUTTON 0x04 /* NOT contiguous with L & RBUTTON */
VK_XBUTTON1 0x05 /* NOT contiguous with L & RBUTTON */
VK_XBUTTON2 0x06 /* NOT contiguous with L & RBUTTON */
* 0x07 : unassigned
VK_BACK 0x08
VK_TAB 0x09
* 0x0A - 0x0B : reserved
VK_CLEAR 0x0C
VK_RETURN 0x0D
VK_SHIFT 0x10
VK_CONTROL 0x11
VK_MENU 0x12
VK_PAUSE 0x13
VK_CAPITAL 0x14
VK_KANA 0x15
VK_HANGEUL 0x15 /* old name - should be here for compatibility */
VK_HANGUL 0x15
VK_JUNJA 0x17
VK_FINAL 0x18
VK_HANJA 0x19
VK_KANJI 0x19
VK_ESCAPE 0x1B
VK_CONVERT 0x1C
VK_NONCONVERT 0x1D
VK_ACCEPT 0x1E
VK_MODECHANGE 0x1F
VK_SPACE 0x20
VK_PRIOR 0x21
VK_NEXT 0x22
VK_END 0x23
VK_HOME 0x24
VK_LEFT 0x25
VK_UP 0x26
VK_RIGHT 0x27
VK_DOWN 0x28
VK_SELECT 0x29
VK_PRINT 0x2A
VK_EXECUTE 0x2B
VK_SNAPSHOT 0x2C
VK_INSERT 0x2D
VK_DELETE 0x2E
VK_HELP 0x2F
* VK_0 - VK_9 are the same as ASCII '0' - '9' (0x30 - 0x39)
* 0x40 : unassigned
* VK_A - VK_Z are the same as ASCII 'A' - 'Z' (0x41 - 0x5A)
VK_LWIN 0x5B
VK_RWIN 0x5C
VK_APPS 0x5D
* 0x5E : reserved
VK_SLEEP 0x5F
VK_NUMPAD0 0x60
VK_NUMPAD1 0x61
VK_NUMPAD2 0x62
VK_NUMPAD3 0x63
VK_NUMPAD4 0x64
VK_NUMPAD5 0x65
VK_NUMPAD6 0x66
VK_NUMPAD7 0x67
VK_NUMPAD8 0x68
VK_NUMPAD9 0x69
VK_MULTIPLY 0x6A
VK_ADD 0x6B
VK_SEPARATOR 0x6C
VK_SUBTRACT 0x6D
VK_DECIMAL 0x6E
VK_DIVIDE 0x6F
VK_F1 0x70
VK_F2 0x71
VK_F3 0x72
VK_F4 0x73
VK_F5 0x74
VK_F6 0x75
VK_F7 0x76
VK_F8 0x77
VK_F9 0x78
VK_F10 0x79
VK_F11 0x7A
VK_F12 0x7B
VK_F13 0x7C
VK_F14 0x7D
VK_F15 0x7E
VK_F16 0x7F
VK_F17 0x80
VK_F18 0x81
VK_F19 0x82
VK_F20 0x83
VK_F21 0x84
VK_F22 0x85
VK_F23 0x86
VK_F24 0x87
* 0x88 - 0x8F : unassigned
VK_NUMLOCK 0x90
VK_SCROLL 0x91
* NEC PC-9800 kbd definitions
VK_OEM_NEC_EQUAL 0x92 // '=' key on numpad
* Fujitsu/OASYS kbd definitions
VK_OEM_FJ_JISHO 0x92 // 'Dictionary' key
VK_OEM_FJ_MASSHOU 0x93 // 'Unregister word' key
VK_OEM_FJ_TOUROKU 0x94 // 'Register word' key
VK_OEM_FJ_LOYA 0x95 // 'Left OYAYUBI' key
VK_OEM_FJ_ROYA 0x96 // 'Right OYAYUBI' key
* 0x97 - 0x9F : unassigned
* VK_L* & VK_R* - left and right Alt, Ctrl and Shift virtual keys.
* Used only as parameters to GetAsyncKeyState() and GetKeyState().
* No other API or message will distinguish left and right keys in this way.
VK_LSHIFT 0xA0
VK_RSHIFT 0xA1
VK_LCONTROL 0xA2
VK_RCONTROL 0xA3
VK_LMENU 0xA4
VK_RMENU 0xA5
VK_BROWSER_BACK 0xA6
VK_BROWSER_FORWARD 0xA7
VK_BROWSER_REFRESH 0xA8
VK_BROWSER_STOP 0xA9
VK_BROWSER_SEARCH 0xAA
VK_BROWSER_FAVORITES 0xAB
VK_BROWSER_HOME 0xAC
VK_VOLUME_MUTE 0xAD
VK_VOLUME_DOWN 0xAE
VK_VOLUME_UP 0xAF
VK_MEDIA_NEXT_TRACK 0xB0
VK_MEDIA_PREV_TRACK 0xB1
VK_MEDIA_STOP 0xB2
VK_MEDIA_PLAY_PAUSE 0xB3
VK_LAUNCH_MAIL 0xB4
VK_LAUNCH_MEDIA_SELECT 0xB5
VK_LAUNCH_APP1 0xB6
VK_LAUNCH_APP2 0xB7
* 0xB8 - 0xB9 : reserved
VK_OEM_1 0xBA // ';

for US
VK_OEM_PLUS 0xBB // '+' any country
VK_OEM_COMMA 0xBC // ',' any country
VK_OEM_MINUS 0xBD // '-' any country
VK_OEM_PERIOD 0xBE // '.' any country
VK_OEM_2 0xBF // '/?' for US
VK_OEM_3 0xC0 // '`~' for US
* 0xC1 - 0xD7 : reserved
* 0xD8 - 0xDA : unassigned
VK_OEM_4 0xDB // '[{' for US
VK_OEM_5 0xDC // '\|' for US
VK_OEM_6 0xDD // ']}' for US
VK_OEM_7 0xDE // ''"' for US
VK_OEM_8 0xDF
* 0xE0 : reserved
VK_OEM_AX 0xE1 // 'AX' key on Japanese AX kbd
VK_OEM_102 0xE2 // "<>" or "\|" on RT 102-key kbd.
VK_ICO_HELP 0xE3 // Help key on ICO
VK_ICO_00 0xE4 // 00 key on ICO
VK_PROCESSKEY 0xE5
VK_ICO_CLEAR 0xE6
VK_PACKET 0xE7
* 0xE8 : unassigned
VK_OEM_RESET 0xE9
VK_OEM_JUMP 0xEA
VK_OEM_PA1 0xEB
VK_OEM_PA2 0xEC
VK_OEM_PA3 0xED
VK_OEM_WSCTRL 0xEE
VK_OEM_CUSEL 0xEF
VK_OEM_ATTN 0xF0
VK_OEM_FINISH 0xF1
VK_OEM_COPY 0xF2
VK_OEM_AUTO 0xF3
VK_OEM_ENLW 0xF4
VK_OEM_BACKTAB 0xF5
VK_ATTN 0xF6
VK_CRSEL 0xF7
VK_EXSEL 0xF8
VK_EREOF 0xF9
VK_PLAY 0xFA
VK_ZOOM 0xFB
VK_NONAME 0xFC
VK_PA1 0xFD
VK_OEM_CLEAR 0xFE
* 0xFF : reserved

-->
</rfhiddrv>
</xml>

MichaelC · « **Reply #18 on:** July 26, 2007, 04:01:07 PM »

Okey dokey. Took a little bit to remember how this worked. You're going to have to edit the XML file to make these changes. Just open notepad and drag the file from the folder into Notepad. Be sure to make a copy of it first.

Once you have the file backed up and in Notepad, add these lines in the "keys" section for every application you want to work with the Google Remote:

<key name="VolumeUp" code="VolumeUp" senda="0xAE" />
<key name="VolumeDown" code="VolumeDown" senda="0xAF" />

Once that's done you'll need to close the Google Remote software and then start it again. It may be just as easy to re-start the computer -- mainly I don't remember if you need to start and stop the X10Net service for the change to take effect.

lestat02882 · « **Reply #19 on:** July 26, 2007, 04:27:06 PM »

Thanks for the help Mike. I'll definitely try that.

But as far as a simple user interface such as the Niveus programming wizard, where I just open it up and assign remote buttons to keyboard keys or programs, is that going to be possible and still be able to use ActiveHome?

Could I potentially edit/delete some of the XML file in the x10nets that is installed with the ActiveHome so that it doesn't work against the x10nets file that is installed with the Niveus software?

MichaelC · « **Reply #20 on:** July 26, 2007, 06:06:17 PM »

You should be able to run the Niveus program now -- is it not working? There's no XML file associated with X10Net or X10Nets or AHP -- just the one for the Google remote -- so there's nothing else you can edit to make this changes you're thinking of.

lestat02882 · « **Reply #21 on:** July 27, 2007, 06:02:20 PM »

Okay, now I think I understand the problem a little bit better. I just reinstalled the Niveus software and of course I get the same spastic operation. I haven't changed the xml file yet, but I will.

This whole time I assumed it was all the buttons that would act spasticallly. What I've just noticed is that some of the buttons don't "struggle" (that is act against each other). For instance, the channel up and down buttons work fine. But if I hit the play button, a movie in Windvd will respond as if the button was hit TWICE. The on screen display will flash PLAY for a nanosecond and then it will display PAUSE. So far the problem is with the volume up and down, play, fast forward, rewind, and stop buttons.

Will changing the xml file fix all of the problem buttons?

lestat02882 · « **Reply #22 on:** July 28, 2007, 09:09:38 PM »

Tech Support at x10 sent me this link for an "older" ActiveHome update;

ftp://ftp.x10.com/pub/applications/activehome/ahp_updt_204.exe

At first no luck.

But then by the grace of the Holy Lord God in Heaven I got this update to work properly with the Niveus software. First I uninstalled everything x10 related. Then I reinstalled Niveus, installed this ActiveHome update they sent me first, and then installed the ActiveHome Pro full application. And of course, I just left the "Google Remote" software uninstalled.

Now everything works as it should. The ActiveHome Pro opens, controls the lights and modules, the timers work, and most importantly it doesn't interfere with the Niveus software's ability to configure the UR86a's buttons and the smooth operation of the subsequent functions in each application, ie Windvd, Winamp, etc.

The x10nets.dll file now has a 204 in its description as opposed to the 202 that was in the ActiveHome that I bought. And it plays nice with Niveus. No volume issues, no spastic operation issues.

I am now one step closer to my dream of becoming the laziest bastard on earth.

One other question now; Is it possible to setup Hotkeys or even Global Hotkeys on the keyboard to control ActiveHome Pro and thus the x10 modules I've got installed? For instance, would it be possible for me to assign the F10 key on my keyboard to turn on an x10 lamp module through ActiveHome? w/ or w/o ActiveHome open on the taskbar?

x10Steve · « **Reply #23 on:** August 03, 2007, 01:27:02 PM »

The UR86A works excellent if you use it with Niveus software, I run version 2.0.1.36 with no issues. I even have some .obc files for programs like VLC and Power DVD, if you would like them. The UR86A and Niveus software will allow you to do anything that you could with your mouse and more. So if you would like to use it to control AHPro it would work great. I use it to control my computer and my X10 lighting in my bedroom. Set up a play list in your favorite media player and your ready to go. Additionally if you had AHPro, LOLA, and a UR86A you could view your PC on your TV and control everything like you were in front of your TV! The original mouse remotes for their time were excellent. The UR86A with the mouse remote software sucks really bad, it's old software on a modern OS what do you expect. UR86A + Niveus software is kick butt. If you need a UR86A call 800-675-3044 and ask for Steve, we'll see what we can do.

Hit me up if you have any questions about getting this product to work for you.

lestat02882

Think of it this way, you need to install Niveus the AhPro in that order for the X10Nets to not be an old out of date version. Also your better off throwing away the mouse remote manual, X10 shouldn't have packed that with this 3rd gen (I believe) mouse remote. That manual is only relevant to the first two versions. Now that you know this get familiar with Niveus software it will allow you to do virtually anything you would like to do. Follow that advice and now you should have a working product that does what you bought it for. :0

X10 has a weird way of doing things. They reuse software when it really shouldn't be used on a modern OS because their time developing the product was little or got cut short. Knowing this the next step as a consumer would be to find the flaws then create work arounds. Usually when I take this approach with X10 products I can pin point issues and find solutions so they are no longer a problem for me.

Steve

lestat02882 · « **Reply #24 on:** August 03, 2007, 05:49:14 PM »

x10steve-

What are .obc files?

In the Niveus programming wizard, do you know what "command line parmaters" and "working directory" options are?

x10Steve · « **Reply #25 on:** August 03, 2007, 06:14:30 PM »

Quote from: lestat02882 on August 03, 2007, 05:49:14 PM

x10steve-

What are .obc files?

In the Niveus programming wizard, do you know what "command line parmaters" and "working directory" options are?

An .ocb file is the extension that Niveus PC remote software saves your profiles as. So if you click on the system tray icon then the programming wizard and save the profile it will be what every you call it .ocb. These files will be saved to My Documents/Niveus PC Remote by default.

I'm not exactly sure why you would want the command line "parameters" and I don't know what you mean by "working directory options". If you go to where you installed the software and the above file path then open the .ocb file in note pad I bet you find the information you are looking for just by examining the example data that you created with your new saved profile. Seems like a moot point seeing as the wizard works great and I've created many profiles with no issues. Lots of extra work for something that can be done with button presses instead of programming by hand.

lestat02882 · « **Reply #26 on:** August 03, 2007, 07:24:45 PM »

Do you have any .obc files for controlling Snapstream's Beyond TV?

It's the program I and many others use to watch live television and record programs using a video capture card in the PC.

lestat02882 · « **Reply #27 on:** August 04, 2007, 01:59:54 PM »

x10steve-

Is it possible to program the Niveus remote to open up different .obc files? For instance if I'm listening to Winamp and controlling it through my Niveus obc file for Winamp and then I want to switch to PowerDVD, can I program a button on the remote to "switch" so to speak, the obc file to the PowerDVD obc?

I just tried this by programming a button on the remote to open up my Winamp obc file, but unfortunately it opened it and didn't close the already open PowerDVD obc. So it didn't work properly.

Do you know how I might accomplish this? Or will it be nessecary for me to switch obc from the keyboard/mouse?

Thanks in advance.

News:

Author Topic: Google Remote, Max10 (Read 58835 times)

lestat02882

Re: Google Remote, Max10

lestat02882

Re: Google Remote, Max10

lestat02882

Re: Google Remote, Max10

MichaelC

Re: Google Remote, Max10

lestat02882

Re: Google Remote, Max10

MichaelC

Re: Google Remote, Max10

lestat02882

Re: Google Remote, Max10

lestat02882

Re: Google Remote, Max10

x10Steve

Re: Google Remote, Max10

lestat02882

Re: Google Remote, Max10

x10Steve

Re: Google Remote, Max10

lestat02882

Re: Google Remote, Max10

lestat02882

Re: Google Remote, Max10