Do all XCam's have IR filters in the lens'?

Started by Aquadeveloper, November 24, 2007, 04:05:30 PM

Previous topic - Next topic

KDR

Aquadeveloper my best guess would be yes.  The IR filter is there to help optimize color on the color cams. As far as I know X10 uses the same lens assembly on all of their cams so all of them have the filter, B&W included.

----------------KDR
Note: "Guests" may read the X10 forum , but you must register to post!

When I'm online you can find me in the Home Automation Chat Room!

Aquadeveloper


Charles Sullivan

Quote from: KDR on November 24, 2007, 08:40:21 PM
Aquadeveloper my best guess would be yes.  The IR filter is there to help optimize color on the color cams. As far as I know X10 uses the same lens assembly on all of their cams so all of them have the filter, B&W included.

One of the reasons for an IR filter is that simple lenses have different focal lengths for different wavelengths of light.  Since the detector is sensitive to both IR and visible light spectra, filtering out the IR provides sharper focusing with the inexpensive lenses in the X10 cameras.

Yesterday it worked.
Today it doesn't work.
X10 on Windows is like that.

HEYU - X10 Automation for Linux, Unix, and Mac OS X     http://www.heyu.org

Aquadeveloper

Charles,

I'm not a 'camera' guy, but did feel they were needed to optimize the
image/optic's.

Thanks,

zach1234


EL34

The ccd element in the camera's are different qualities also.

Have a few low light cameras that are so sensitive, they can see without any infrared light source when your eyes have a hard time making out the same scene.

I have some cheaper camera's that can't do what the low light camera's can do.

Of course after is gets completely dark, the low light cameras need IR light to see in total dark but they do a great job in very low light levels.

Non of my cameras have the red filter in the lens.
W10 - CM15A - AHP 3.301 - i Witness - MyHouse online - Smart Macros - SDK using Visual Basic express 2008
My X10 page-> http://www.el34world.com/Misc/home/X10_0.htm

Alan V

Keep in mind that the CMOS imager in the camera may saturate (especially in bright sunlight) if the IR filter is removed.  If the camera is to be used indoors, then you might be okay.

dellzip

Quote from: EL34 on December 28, 2007, 07:50:33 AM
The ccd element in the camera's are different qualities also.

Have a few low light cameras that are so sensitive, they can see without any infrared light source when your eyes have a hard time making out the same scene.

I have some cheaper camera's that can't do what the low light camera's can do.

Of course after is gets completely dark, the low light cameras need IR light to see in total dark but they do a great job in very low light levels.

Non of my cameras have the red filter in the lens.

Thanks!