Please login or register.

Login with username, password and session length

Author Topic: Number of Cameras  (Read 3390 times)

Kramer Chins

  • Hero Member
  • *****
  • Helpful Post Rating: 16
  • Posts: 262
    • Kramer Chins
Number of Cameras
« on: March 14, 2009, 11:00:00 AM »

I know I have posted asking how many cameras AHP can hold... And the answer was 8.

Is there anyway to increase this number?
Logged
Registered Members of MCBA... WWW.KRAMERCHINS.COM

Trying to learn X10 Day by Day...........

hawk1

  • Hero Member
  • *****
  • Helpful Post Rating: 21
  • Posts: 625
Re: Number of Cameras
« Reply #1 on: March 14, 2009, 11:20:05 AM »

I don't know who told you it was 8.  AHP can hold a lot more cameras than 8! Although i personally have never had more than 12 hooked up at one time.

I have a software program that i bought a long time ago that holds 16!

I would think that you have 256 codes to play with, you could, could i say probably have 256 cams.  Whether they work or not that is the question.  They should as long as your x10 system is reliable. (phase coupler, noise filters, within range, etc...)
 :'
Logged
koopr@sstelco.com, I don't know what I'm doin but I'm havin fun doin it!

Puck

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 171
  • Posts: 1799
Re: Number of Cameras
« Reply #2 on: March 14, 2009, 01:17:10 PM »

I don't know who told you it was 8. 

Actually, it was you.  :P

But the question didn't actually ask what the maximum is, just how many do you have. So it was an easy misinterpretation.  ;)

Multi Cams--- How Many??

I'm surprised that post slipped by without additional comments. I will add to it as well to try and remove any ambiguity.

However,you are right, there are 256 X10 addresses, so you could conceivably have that many cameras before more than one would be turned on at once.
Logged

hawk1

  • Hero Member
  • *****
  • Helpful Post Rating: 21
  • Posts: 625
Re: Number of Cameras
« Reply #3 on: March 14, 2009, 01:25:08 PM »

Yep, I remember the "other" question about how many cams do you have, which is 8.  I guess it was a misunderstanding.  ???  ;)
Logged
koopr@sstelco.com, I don't know what I'm doin but I'm havin fun doin it!

birdzeye

  • Hero Member
  • *****
  • Helpful Post Rating: 3
  • Posts: 475
Re: Number of Cameras
« Reply #4 on: March 19, 2010, 11:40:10 PM »

I've got 9 cameras, and 5 of them are plugged into 3-pin appliance modules. My receiver is also plugged into an appliance module. This setup usually works OK although lately all my cameras will just turn off for some strange reason that I think might be due to a motion sensor. Then again, it could be AHP. I don't even know where to begin to try and sort it out. It's getting complicated!
Logged

evadorev

  • Sr. Member
  • ****
  • Helpful Post Rating: 4
  • Posts: 79
Re: Number of Cameras
« Reply #5 on: March 28, 2010, 09:51:39 PM »

my reply is for birdzeye.

Can you give me your setup: cameras model, receiver and other things.

 I`ve already got AHP, a bunch of modules and i want to buy cameras but i don`t know where to start.
 i don`t want to buy their f!!!!! kits because most of the stuff included on the kits, i have it.

thanks in advance 

Logged
Mary had a little lamp, little lamp, controlled by X10 !!!! (kid song!!)
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.