Newbie need Help

[lmbrsn]

I am a newbie and have a few questions. Sorry if this has been answered before but I don't really know what to ask.
I have 200 amp power coming in to a pole with a breaker box, there are 2 100 amp breakers in it. 1 breaker goes to the house about 300 ft with a breaker box on it. The 2nd breaker goes to the barn which is about 200 ft from the main pole.
My question is about phase converters, how many do I need. Just 1 to tie the phases together or 1 at every breaker box.
I just want to turn some lights on at the barn from the house. It will go through 3 breaker boxes. Is this do able?
Thanks Jim

[lodtrack]

My thought is you could get by with a phase coupler installed at the pole where the two branch circuits split. I don't have experience with the distances that you are talking as the X10 powerline signal essentially has to travel 500 feet from the house to the barn. Since you need a phase coupler anyway, I would recommend you buy a combo unit(phase coupler/booster) Perhaps others with "distance" experience will jump in to recommend a specific module.

[dave w]

I would recommend you buy a combo unit(phase coupler/booster) Perhaps others with "distance" experience will jump in to recommend a specific module.

The XTBIIR from JV Digital Engineering has the highest PLC output on the market. The ACT CR234 is next. Finally the X10 XPCR...but it is the least expensive.

[lmbrsn]

Thanks, That is what I thought. I talked to a salesman and they said that I needed 3 couplers.
Any suggestions on switches, they will be for flood lights only no dimming needed. I need 2 switches that are the decorator style, and 6 of the regular light switch.
Also do they make a motion sensor flood light that the on off switch will over ride the motion switch?.
I am trying to talk the wife into this, so I need to kind of come up with a budget.
Thanks.
Jim

[dave w]

Thanks, That is what I thought. I talked to a salesman and they said that I needed 3 couplers.
Any suggestions on switches, they will be for flood lights only no dimming needed. I need 2 switches that are the decorator style, and 6 of the regular light switch.
Also do they make a motion sensor flood light that the on off switch will over ride the motion switch?.
I am trying to talk the wife into this, so I need to kind of come up with a budget.
Thanks.
Jim

http://www.x10.com/homepage.htm
WS12A - incandescent only
WS467A- mincandescent only
WS13A - incandescent, CFL, LED, etc. Needs a neutral line.
PR511A

http://www.smarthome.com/_/X10_Compatible/_/23X/land.aspx