Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Flags only work in hardware interface?  (Read 4585 times)

guyski1

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Flags only work in hardware interface?
« on: February 09, 2011, 01:11:20 AM »
I have AHP with Smart Macros running on a PC with XP. I don't have a hardware X10 interface, I use the PC with a CM19a.  I can not get flags to change state. Do I have to have a hardware interface in order to use flags? 
Logged

bkenobi

  • PI Expert
  • Hero Member
  • ******
  • Helpful Post Rating: 24
  • Posts: 2082
Re: Flags only work in hardware interface?
« Reply #1 on: February 10, 2011, 12:20:28 PM »
As I understand (could be wrong), the CM15A can use flags but the PC cannot.  On the other side, the CM15A can only monitor module states for one house code (16 total modules) whereas the PC can monitor all house codes (256 total modules).  I've read that people typically use dummy/phantom modules for PC side AHP coding and flags for CM15A side coding.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.