Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: X10 Cameras  (Read 3501 times)

tony gerada

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
X10 Cameras
« on: October 25, 2005, 11:58:30 PM »
 
Hi,
I live down under, can the X10 cameras be
switched to transmit PAL instead of NTSC.
Thanks
Tony
Logged

SamEyeHam

  • Guest
Re: X10 Cameras
« Reply #1 on: October 29, 2005, 01:06:28 AM »
They transmit STATIC format images. This
will be compatible with any TV with all the
circuitry ripped out of it.  The resolution
is really 10 pixels by 12 pixels.  This is
high resolution for the STATIC standard.
And the night watch cameras are just that,
you can watch the dark night with a black
image on your screen.
Logged

SnotGeezer

  • Guest
Re: X10 Cameras
« Reply #2 on: November 07, 2005, 01:37:13 PM »
ditto sam
Logged

anonymous

  • Guest
Re: X10 Cameras
« Reply #3 on: November 19, 2005, 06:55:50 PM »
Thanks, SamEyeHam,  SnotGeezer.
Tony
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: X10 Cameras
« Reply #4 on: November 20, 2005, 12:00:15 PM »
They are NTSC and if you don't have  120
volt power the supplies will also not
connect to the mains.
Logged

skootch

  • Guest
Re: X10 Cameras
« Reply #5 on: December 03, 2005, 11:40:31 PM »
is STATIC an ISO standard signal?
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: X10 Cameras
« Reply #6 on: December 04, 2005, 06:18:32 AM »
Static to me is the noise a receiver makes
when NO signals are there just the back
ground noise.
Logged

skootch

  • Guest
Re: X10 Cameras
« Reply #7 on: December 07, 2005, 04:29:50 PM »
not static, you dolt!  STATIC is the iso
5872.9a standard for electronic crap that
doesn't work at all.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.