Please login or register.

Login with username, password and session length

Author Topic: Ninja Pan Tilt/Mount upside down?  (Read 7880 times)

athony c.

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Ninja Pan Tilt/Mount upside down?
« on: November 14, 2005, 11:31:04 PM »

JUst purchased Active Pro and Iwitness.  My
lamp modules and switches work according to
my macro's and have one color and one low
light cam working with white lines (static
from wireless phones or network).  I have a
ninja pan/tilt unit I wish to install
upside down under my house eave.  I think
mounting it upside down would reverse the
left/right up/down functions.  Is there a
setting so the controls won't be backward?
Also can I still get it it to aim at
whichever motion detector is being set
off?  
Logged

xaxor

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 9
Re: Ninja Pan Tilt/Mount upside down?
« Reply #1 on: November 21, 2005, 08:24:41 PM »

yes u can aim where ever you want
i reccoment unscrewing the little circular
part of the camera (the camera itself from
its mount) and putting it on upside down.
The motion dectection presets should be
fine, aslong as when you set the preset
locations, you have already mounted it
upside down

i also would like to know if you can
reverso the controls on the remote, but if
not i can live without it
Logged

xaxor

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 9
Re: Ninja Pan Tilt/Mount upside down?
« Reply #2 on: November 21, 2005, 08:24:45 PM »

yes u can aim where ever you want
i reccoment unscrewing the little circular
part of the camera (the camera itself from
its mount) and putting it on upside down.
The motion dectection presets should be
fine, aslong as when you set the preset
locations, you have already mounted it
upside down

i also would like to know if you can
reverso the controls on the remote, but if
not i can live without it
Logged

xaxor

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 9
Re: Ninja Pan Tilt/Mount upside down?
« Reply #3 on: November 22, 2005, 05:55:25 PM »

now that i know that you have the
nightwatch cmaera, i would like to know how
good it is, how good is it in the dark? if
it is outside, with a floodlight could you
see enough?
Logged

xaxor

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 9
Re: Ninja Pan Tilt/Mount upside down?
« Reply #4 on: November 22, 2005, 05:55:32 PM »

now that i know that you have the
nightwatch cmaera, i would like to know how
good it is, how good is it in the dark? if
it is outside, with a floodlight could you
see enough?
Logged

e.thomas

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: Ninja Pan Tilt/Mount upside down?
« Reply #5 on: November 29, 2005, 09:32:35 AM »

 I mounted a Ninja upside down under the
eave but the pan and tilt range is very
limited. I then changed it, I mounted the
Ninja against the wall under the eave.  This
made thing much better!
The Ninja mounted upside down would be the
same as if you were hanging by your ankles
to view something as aposed to leaning out
of a window for the same view!
Logged

frowny

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 32
Re: Ninja Pan Tilt/Mount upside down?
« Reply #6 on: January 24, 2006, 12:20:17 AM »

Ninja will leak water from driving rain if
hung upside down.  Make sure you shield it
well if outdoors.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.