Console gives trouble chime, no zones lit, bypass doesn't do anything!

[brian]

I just bought another X10 phone dialer
console because the first one died. This one
now is giving me a trouble chime but none of
the zones are lit up and the bypass switch
doesn't seem to do anything (my old bypass
didn't work either). I checked all my
sensors and they seem to be fine. Any ideas?

[rj]

On your handheld remote (at the very
bottom), try sliding the switch to min, not
max. Do this on all of your handhelds, if
you have more than one. I was having the
same problem, and Tech support had me do
this, and it worked! Hope this helps.

[jean]

My autodialler security console model PS561
chimes every hour for no reason.  I only
have two zones and it will often lose
communication with either of these.
Batteries are good, I have reinstalled
several times.

Any ideas what is causing this problem?

Is there anyway to reinstall a zone without
reinstalling the whole system?

[erick]

I have the same problem as Jean, the console
chimes every 30 minutes , five times  and
the zone 4 wich is a window/door sensor
flash slowly and continuosly, i already
replace the batteries but the problem didn`t
solve.  Any one knows what is the problem?

[greg]

I have the same problem with my DS7000.  I
get 5 chimes: apparent problem with 2 window
sensors - but unit chimes when they're
opened, so communication appears to be
working.  It has been a running joke with
friends that come over asking what the noise
is, but my wife and I are growing tired of it
(especially hearing it early in the morning).
Any suggestions welcome.