Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Wireless Video Sender  (Read 19322 times)

jimmy4040

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Wireless Video Sender
« on: July 19, 2006, 02:04:39 PM »
I just purchased this product Wireless Video Sender. I am experiencing problems getting my cable box to work with this device.
The cable box has a coax and RCA outputs. I know both of them are live because I tested it on TV together.

As soon as I plug the sender in the RCA outputs the cable box shuts off. It doesn't come on back until I unplug it.
Any ideas?
My plasma is in the master bedroom and it is locate in a weird place. Please help provide a solution.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Wireless Video Sender
« Reply #1 on: July 19, 2006, 04:47:59 PM »
Do you know if the RCA Jacks are Composite Video and Analog Sound?
Logged

jimmy4040

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: Wireless Video Sender
« Reply #2 on: July 19, 2006, 06:50:18 PM »
thx for replying brian.
I finally got the video to display on the secondary TV.
Here is the new problem. As soon as I pugged the IR cable in box I get "unusable signal." 

Any suggestions will help.


PRIMARY TV
========
BTW, in order to get my setup to work I had to disconnect all the cable.
I then use the RCA cables on the sender and plugged it into the RCA audio and video on the cable box ( I left the TV disconnected).

I then plugged the receiver in and plugged into video 3 on my seconday TV.  Once the seconday TV start working I used the coax for my primary TV.

----------------------------
Now my problem is changing channels. Please help X10 guy. My roommate is laughing at me. She said it would have been cheaper to get a second cable box. I want to get the TV on the deck working. So, she can buy me a couple of drinks free. :)

help techstaz!!!
Logged

jimmy4040

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: Wireless Video Sender
« Reply #3 on: July 24, 2006, 03:16:19 PM »
Can someone offer some assistance with the IR connect problem?[
« Last Edit: July 25, 2006, 04:04:20 PM by jimmy4040 »
Logged

msandi

  • Newbie
  • Helpful Post Rating: 1
  • Posts: 4
Re: Wireless Video Sender
« Reply #4 on: October 02, 2006, 10:34:28 PM »
I'm having some trouble with the Video Sender too.  I can get everything to work on my secondary TV using the RCA Out on the cable box, but the only way I can see anything on my primary TV is by unplugging the RCA cables from the back of the cable box.

Do I need a switch box now? ???
Logged

msandi

  • Newbie
  • Helpful Post Rating: 1
  • Posts: 4
Re: Wireless Video Sender
« Reply #5 on: October 02, 2006, 11:20:04 PM »
I figured it out!!

Everything works!  I just had the TV/VCR button pushed for my TV, so the cable wasn't showing.  It's working now!
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.