Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Sometimes the appliance modules work and sometimes they don't  (Read 3200 times)

jkfabrizi

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Sometimes the appliance modules work and sometimes they don't
« on: December 13, 2006, 02:00:22 AM »
I am running active home pro to run my christmas lights.  I had trouble with some modules working. sometimes they will work sometimes they don't work.  I installed an xpcp phase coupler, the problem went away at first, then returned.   I am frustrated with this whole set up.   on the phase coupler there appears to be  a light,  Is it supposed to be on while in operation or not? 
Logged

Puck

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 171
  • Posts: 1799
Re: Sometimes the appliance modules work and sometimes they don't
« Reply #1 on: December 13, 2006, 02:44:55 AM »
Phase Coupling is always recommended. After that you have to track down noise problems and signal suckers. Check out TakeTheActive's TTA's X10 Troubleshooting Tips Thread [Updated: 2006/11/18] thread... you're sure to find the reason why sometimes things work & sometimes they don't.  ;)


[Changed the link to point to the start of the thread... too much info to just jump to a particular post within it.  ;)]
« Last Edit: December 13, 2006, 12:09:09 PM by Puck »
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.